CADprofi Mechanical content

Here you can easily check CADprofi Mechanical content by typing the element name or standard number.

NameStandard
Search this column by typing the element name...Search this column by typing the standard reference number...

Bolts:

Hexagon head bolt - Product grade A and BISO 4014, EN ISO 4014, DIN EN ISO 4014, PN EN ISO 4014, IS 1364-1, BS EN 24014
Hexagon head bolt - Product grade A and B uprISO 4014
Hexagon head boltISO 4017, EN ISO 4017, DIN EN ISO 4017, PN-85/M-82105, GOST 7796-70, IS 1364-2, JIS B 1180, BS EN 24017
Hexagon head screwsISO 4018, IS 1363-2, JIS B 1180 A+B, BS EN ISO 4018
Hexagon head bolt, with fine pitch threadISO 8676, EN ISO 8676, DIN EN ISO 8676, PN-85/M-82105, GOST 7796-70, JIS B 1180, BS EN 28676
High-strength hexagon head bolts with large widthsISO 7412, EN 14399-4, DIN 6914, PN EN 14399-3
System HV - Hexagon fit boltEN 14399-8
Hexagon flange head boltISO 4162, EN ISO 4162, DIN 6921, PN 82247
Hexagon socket countersunk head screwISO 10642, EN ISO 10642, DIN 7991, PN-EN ISO 10642
Hexagon head bolt - Product grade CISO 4016, ANSI B 18.2.1, ASME B 18.2.1, EN ISO 4016, DIN EN ISO 4016, PN EN ISO 4016, IS 1363-1, JIS B 1180 C, BS EN ISO 4016
Hexagon head bolt - Product grade B - Reduced shankISO 4015, EN 24015, DIN EN 24015, PN-EN 24015, BS EN ISO 4015
Hexagon socket head cap screwISO 4762, EN ISO 4762, DIN EN ISO 4762, PN-EN ISO 4762, GOST 11738-84, IS 2269, BS 4168
Countersunk flat niob bolt with cross recess type HISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80, IS 7486, JIS B 1111, BS EN ISO 7047
Countersunk flat niob bolt with cross recess type ZISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80, IS 7486, JIS B 1111, BS EN ISO 7047
Slotted raised countersunk head screwISO 2010, EN ISO 2010, DIN-EN ISO 2010, PN-EN ISO 2010, GOST 17474-80, IS 8911, JIS B 1101, BS EN 2010
Slotted countersunk head boltsDIN 7969
Hexagon socket head cap screws with centre, with low headDIN 6912
Hexagon socket head cap screws with low headDIN 7984
Square head bolt with collarDIN 478, PN-87/M-82301
Knurled thumb screw with low headDIN 653, PN-88/M-82457, GOST 21332-75
Knurled thumb screw with high headDIN 653, PN-88/M-82456, GOST 21331-75
Hexagon head boltDIN 7990, IS 6639
Round head niob boltDIN 604, PN-91/M-82408, GOST 7785-81
Cup nibbed head boltDIN 607, PN-91/M-82410, GOST 7783-81
Eye boltDIN 444, PN-77/M-82425, GOST 14724-69
Hexagon socket set screw with Flat PointDIN 913, PN-EN ISO 4026
Hexagon socket set screw with Cone PointDIN 914, PN-EN ISO 4027
Hexagon socket set screw with Dog PointDIN 915, PN-EN ISO 4028
Slotted set screw with long Dog PointDIN EN 27435
Countersunk raised head screw - with type HISO 7046, EN ISO 7046, DIN-EN ISO 7046, PN-EN ISO 7046, GOST 17475-80, IS 7485, JIS B 1111
Countersunk raised head screw - with type ZISO 7046, EN ISO 7046, DIN-EN ISO 7046, PN-EN ISO 7046, GOST 17475-80, IS 7485, JIS B 1111
Pan head screw with cross recess type HISO 7045, EN ISO 7045, DIN EN ISO 7045, PN-EN ISO 7045, IS 7483
Pan head screw with cross recess type ZISO 7045, EN ISO 7045, DIN EN ISO 7045, PN-EN ISO 7045, IS 7483
Slotted countersunk flat head screwISO 2009, ANSI B 18.6.3, ASME B 18.6.3, EN ISO 2009, DIN-EN ISO 2009, PN-EN ISO 2009, GOST 17475-80, IS 1365, JIS B 1101
Slotted set screw with cone pointISO 7434, EN 27434, DIN-EN 27434, PN-EN 27434, GOST 1476-93
Slotted set screws with cup pointEN 27436, DIN EN 27436, PN-EN 27436
Hexagon socket set screw with Cup PointISO 4029, EN ISO 4029, DIN-EN ISO 4029, PN-EN ISO 4029, JIS B 1177
Hexagon socket set screw with Cone PointISO 4027, EN ISO 4027, DIN-EN ISO 4027, GOST 8878-93, JIS B 1177
Hexagon socket set screw with Flat PointISO 4026, EN ISO 4026, DIN-EN ISO 4026, JIS B 1177
Hexagon socket set screw with Dog PointISO 4028, EN ISO 4028, DIN-EN ISO 4028, GOST 11075-93, JIS B 1177
Slotted set screws with flat pointISO 4766, DIN EN ISO 4766
Slotted headless screw with shankISO 2342, DIN EN ISO 2342
Cup head square neck bolt with large headISO 8677, DIN 603, PN-87/M82406, GOST 7802-81
Hexagon socket head shoulder screwISO 7379, ANSI B 18.3.3M, ASME B 18.3.3M
Hexagon socket button head screwsISO 7380-1, EN ISO 7380-1, DIN EN ISO 7380-1, PN EN ISO 7380-1, GOST ISO 7380-1, JIS B 1174
Hexagon socket button head screws with collarISO 7380-2, EN ISO 7380-2, DIN EN ISO 7380-2, PN EN ISO 7380-2, GOST ISO 7380-2
Square head bolt with short dog pointDIN 479
Square head bolt with collar and short dog point with rounded endDIN 480
Hexagon head set screw with small hexagon and dog pointDIN 561
Hexagon head set screw with small hexagon and half dog point and flat cone pointDIN 564
Hexagon fit bolt with long threaded portionDIN 609, PN-91/M-82342
Hexagon fit bolt with long threaded portion (fine thread)DIN 609, PN-91/M-82342, IS 3640
Hexagon head bolt with metric fine pitch thread. Product grades A and BDIN EN ISO 8765
Hexagon fit boltDIN 7968
System HV - Hexagon fit boltDIN EN 14399-8
Lifting eye boltDIN 580, PN-92/M-82472, GOST 4751-73
Lifting eye bolt (fine thread)DIN 580, PN-92/M-82472
Studs - Metal end 1dDIN 938
Studs - Metal end 1.25dDIN 939
Studs - Metal end 2dDIN 835
Fasteners - Stud boltDIN 976-1A
T-head bolt with double nibDIN 188
Square head boltPN-88 M-82121, IS 2585
Eye bolt threaded up to the headPN-77/M-82426
Hexagon fit bolt with short threaded portionPN-91/M-82341
Hexagon fit bolt with short threaded portion (fine thread)PN-91/M-82341
Square head set screw with cone pointPN-87/M-82305
High Strength Structural BoltsIS 3757
Cup head square neck coach boltsIS 2609
Bolts

Spring-, Fit- and Spacer Unit 244.16FIBRO 244.16, FIBRO 244.16
Shoulder screw 244.17FIBRO 244.16, FIBRO 244.16

Washers

Plain washer - Normal series - Product grade AISO 7089, ANSI B 18.22.1, ASME B 18.22.1, EN ISO 7089, DIN 125-1A, PN-78/M-82005, GOST 6958-78, JIS B 1256
Plain washer - Normal series - Product grade CISO 7091, ANSI B 18.22.1, ASME B 18.22.1, EN ISO 7091, DIN ISO 7091, PN ISO 7091, GOST 6958-78, JIS B 1256
Plain washer, chamfered - Normal series - Product grade AISO 7090, EN ISO 7090, DIN 125-1B, PN-78/M-82006, GOST 11371-78, JIS B 1256
Plain washer - Large series -- Part 1: Product grade AISO 7093-1, EN ISO 7093-1, DIN 9021, PN ISO 7093-1, GOST 9649-78, JIS B 1256
Plain washer - Large series -- Part 2: Product grade CISO 7093-2, EN ISO 7093-2, DIN ISO 7093-2, PN ISO 7093-2, JIS B 1256
Plain washer - Extra large series -- Product grade CISO 7094, EN ISO 7094, DIN ISO 7094, PN ISO 7094, JIS B 1256
Plain washer - Small series - Product grade AISO 7092, EN ISO 7092, DIN 433, PN-78/M-82007, GOST 10450-78, JIS B 1256
Plain washer for clevis pins -- Product grade AISO 8738, EN 28738, DIN 1440, PN-EN 28738
Plain washer, chamfered, hardened and tempered for high-strength structural boltingISO 7416, EN 14399-6, DIN 6916
Disc springEN 16983, DIN 2093
Spring lock washer lightDIN 127, PN-77/M-82008, GOST 6402-70
Spring lock washer for screws with cylindrical headDIN 7980, GOST 6402-70
Spring look washer, heavy dutyDIN 128, GOST 6402-70
Toothed lock washer with internal teethDIN 6797J, PN-82/M-82023
Toothed lock washer with external teethDIN 6797A, PN-82/M-82024
Serrated lock washerDIN 6798J, GOST 10462-81
Serrated lock washerDIN 6798A, GOST 10463-81
Square washer for wood constructionDIN 436, PN-59/M-82010
Square taper washer for U-section 8%DIN 434, PN-79/M-82018, GOST 10906
Square taper washer for I-section 14%DIN 435, PN-79/M-82009
Conical spring washerDIN 6796, GOST 13439-68
Spherical washer CDIN 6319, PN-78/M-82026, GOST 13438-68
Spherical washer DDIN 6319, PN-78/M-82026
Washers for clevis pins - Product grade CDIN 1441
Wave spring washerDIN 137, PN-82/M-82037
Square taper washers for high-strengthDIN 6917
Square taper washers for high-strength structual bolting of steel channel sectionsDIN 6918
Tabwasher with 1 tabDIN 93, PN-82M-82021, GOST 13463-77
Tabwasher with 2 tabsDIN 963, PN-82M-82022, GOST 13464-77
Shim ringDIN 988
Washer for steel constructionsDIN 7989
Plain washers for bolts with heavy clamping sleevesDIN 7349
Plain washer, chamfered, hardened and tempered for high-strength structural boltingDIN EN 14399-6, PN-82/M-82039
Spring lock washerPN-77/M-82008, JIS B 1251
Plain washerIS 2016
Square washerJIS B 1256
Plain washer - Normal diameter, Normal thickness - Product grade ABS 4320
Plain washer - Normal diameter, Light thickness - Product grade BBS 4320
Plain washer - Large diameter, Normal thickness - Product grade CBS 4320
Plain washer - Large diameter, Light thickness - Product grade DBS 4320
Plain washer - Larger diameter, Normal thickness - Product grade EBS 4320
Plain washer - Larger diameter, Normal thickness - Product grade FBS 4320
Plain washer - Largest diameter, Larger thickness - Product grade GBS 4320
Plain washer, chamfered - Normal series - Product grade A and BBS 4320
Plain washer, chamfered - Normal series - Product grade C and DBS 4320
Plain washer, Larger than the M68BS 4320

Nuts

Hexagon nut, style 1 - Product grade A and BISO 4032, EN 24032, DIN-EN 24032, PN-EN 24032, GOST 5915-70, JIS B 1181, BS EN 24032
Hexagon nut - Product grade CISO 4034, ANSI B 18.2.2, ASME B 18.2.2, EN 24034, DIN-EN 24034, PN-EN 24034, GOST 5927-70, IS 1363-3, JIS B 1181, BS EN 24034
Hexagon nuts, style 2 -- Product grades A and BISO 4033, EN ISO 4033, DIN-EN ISO 4033, PN-EN ISO 4033, JIS B 1181, BS EN 24033
Hexagon thin nuts unchamfered (style 0) - Product grade BISO 4036, EN ISO 4036, DIN-EN ISO 4036, PN-EN ISO 4036, JIS B 1181, BS EN 24036
Hexagon high nuts (style 2) with metric fine pitch thread -- Product grades A and BISO 8674, EN ISO 8674, DIN-EN ISO 8674, PN-EN ISO 8674, JIS B 1181, BS EN 28674
Hexagon nut, style 1, with metric fine pitch thread - Product grade A and BISO 8673, EN 28673, DIN-EN 28673, PN-EN 28673, GOST 5915-70, JIS B 1181, BS EN 28673
Hexagon thin nut (chamfered) -- Product grade A and BISO 4035, EN 24035, DIN-EN 24035, PN-EN 24035, GOST 5916-70, JIS B 1181, BS EN 24035
Hexagon thin nut (chamfered) with metric fine pitch thread-Product grade A and BISO 8675, EN 28675, DIN-EN 28675, PN-EN 28675, GOST 5916-70, JIS B 1181, BS EN 28675
Steel hexagon nuts with large width across flats for high-strength structural boltingISO 7414, EN 14399-4, DIN 6915, PN-EN 14399-4
Prevailing torque type hexagon nut (with non-metallic insert), style 1,- Property class 6, 8 and 10ISO 10512, DIN 985, PN-52/M-82175
Prevailing torque type hexagon nut with flange (with non-metallic insert)- Product grade A and BISO 1666, EN 1666, DIN-EN 1666, PN-EN 1666
Hexagon flange nutISO 4161, EN-ISO 4161, DIN-ISO 4161, PN-EN 1661, GOST P 50592-93
Hexagon flange nutEN 1663, DIN-EN 1663, PN-EN 1663, GOST 8918-69
Hexagon flange nutEN 1664, DIN-EN 1664, PN-EN 1664
Hexagon flange nutDIN-EN 1661, PN-ISO 4161
Hexagon flange nutDIN 6923
Hexagon flange nut with fine threadEN 1667, DIN-EN 1667, PN-EN 1667
Hexagon sloted and castle nut - type ZDIN 935, PN-86/M-82148, GOST 5918-73
Hexagon sloted and castle nut - type KISO 7035, EN-ISO 7035, DIN 935, PN-86/M-82148, GOST 5918-73
Thin hexagon castle nut, Sloted and Castle nut - type ZISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73
Thin hexagon castle nut, Sloted and Castle nut - type KISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73
Prevailing torque type hexagon nutISO 10511, EN ISO 10511, DIN ISO 10511, PN ISO 10511
Prevailing torque type hexagon nut with fine pitch threadISO 10513, EN ISO 10513, DIN ISO 10513, PN ISO 10513
Prevailing torque type hexagon nutISO 7040, EN ISO 7040, DIN-EN ISO 7040, PN-EN ISO 7040
Prevailing torque type hexagon nutISO 7042, EN ISO 7042, DIN-EN ISO 7042, PN-EN ISO 7042
Prevailing torque type hexagon nutISO 7041
Prevailing torque type hexagon nut with flangeISO 7043
Prevailing torque type hexagon nut with flangeISO 7044
Prevailing torque type hexagon nutISO 7719
Hexagon high nutDIN 6330, PN-86/M-82155, GOST 15523-70
Hexagon high nut with metric fine pitch threadDIN 6330, PN-86/M-82155, GOST 15523-70
Hexagon connection nut - height 3 dDIN 6334
Hexagon nut 1,5d with collarDIN 6331, PN-87/M-61272
Square nut - type 1DIN 557, PN-88/M-82151
Square nut - type 2DIN 562, PN-88/M-82151
Knurled thin nutDIN 467, PN-91/M-82462
Knurled high nutDIN 466, PN-91/M-82461
Hexagon cap nutDIN 917, PN-88/M-82182, GOST 11860-85
Hexagon domed cap nutDIN 1587, PN-88/M-82181, GOST 11860-85
Prevailing torque type hexagon domed cap nutsDIN 986, PN-64/M-82439
Wing nutDIN 315, PN-92/M-82472, GOST 3032-76
Lifting eye nutDIN 582

Countersinks

Countersink for countersunk head screwISO 7721, DIN 74, PN-87/M-82068
Countersink for hexagon socket head boltDIN 974-1, PN-83/M-82069, GOST 12876-67
Countersink for head bolt hexagon and hex nut without washerDIN 974-2, PN-83/M-82069, GOST 12876-67
Countersink for head bolt hexagon and hex nut with washerDIN 974-2, PN-83/M-82069, GOST 12876-67
Countersink for countersunk head screwDIN 66, PN-87/M-82068, GOST 12876-67
Countersink for slotted pan head screwsPN-83/M-82069
Countersink for head bolts hexagon reducedPN-83/M-82069
Countersink for countersunk self tapping screwPN-87/M-82068

Holes - (through) for screws and bolts

Hole - high qualityDIN EN 20273, GOST 11284-75
Hole - medium qualityDIN EN 20273, GOST 11284-75
Hole - low qualityDIN EN 20273, GOST 11284-75
Blind holeGOST 12415-80
Elongated hole

Taped holes

Taped hole - trough metricISO 724, EN ISO 724, DIN-ISO 724, PN ISO 724, GOST 24705-81, JIS B 0205
Taped hole - trough inchISO 725, EN ISO 725, DIN-ISO 725, PN ISO 725, JIS B 0206
Taped hole - blindDIN 76-1, PN-89/M-82063

Screws

Slotted pan head screw - Product grade AISO 1580, EN ISO 1580, DIN EN ISO 1580, PN EN ISO 1580, GOST 17473-80, IS 6101
Slotted cheese head screw - Product grade AISO 1207, EN ISO 1207, DIN EN ISO 1207, PN EN ISO 1207, GOST 1491-80, IS 1366, JIS B 1101
Cross recessed raised countersunk (flat) head tapping screwISO 7050, EN ISO 7050, DIN ISO 7050, PN EN ISO 7050, GOST 1145-80, JIS B 1122
Cross recessed raised countersunk (oval) head tapping screwISO 7051, EN ISO 7051, DIN ISO 7051, PN EN ISO 7051, GOST 1146-80, JIS B 1122
Slotted raised countersunk (oval) head tapping screw (common head style)ISO 1483, EN ISO 1483, DIN ISO 1483, PN EN ISO 1483, JIS B 1115
Hexagon head tapping screwISO 1479, EN ISO 1479, DIN ISO 1479, PN EN ISO 1479, JIS B 1123
Hexagon flange head tapping screwISO 10509, EN ISO 10509, DIN ISO 10509, PN ISO 10509
Slotted pan head tapping screwISO 1481, EN ISO 1481, DIN ISO 1481, PN EN ISO 1481, JIS B 1115
Slotted countersunk (flat) head tapping screw (common head style)ISO 1482, EN ISO 1482, DIN ISO 1482, PN EN ISO 1482, JIS B 1115
Slotted pan head screws with small headDIN 920
Slotted pan head screws with large headDIN 921
Slotted pan head screw with small head and full dog pointDIN 922
Slotted pan head screws with shoulderDIN 923
Slotted raised countersunk head screw with dog pointDIN 924
Slotted countersunk head screw with dog pointDIN 925
Slotted shoulder screwsDIN 927
Slotted raised countersunk (oval) head wood screwsDIN 95
Slotted round head wood screwsDIN 96
Slotted countersunk (flat) head wood screwDIN 97
Hexagon head wood screwsDIN 571
Hexagon head drilling screw with tapping screw thread with collarDIN 7504 (K)
Slotted hex head self-drilling tapping screw with collarDIN 7504 (L)
Slotted pan head tapping screwDIN 7971
Slotted countersunk (flat) head tapping screw (common head style)DIN 7972
Slotted raised countersunk (oval) head tapping screw (common head style)DIN 7973
Hexagon head tapping screwDIN 7976
Cross recessed pan head tapping screwDIN 7981
Cross recessed raised countersunk (flat) head tapping screwDIN 7982
Cross recessed raised countersunk (oval) head tapping screwDIN 7983
Cross recessed raised countersunk (oval) head wood screwDIN 7995
Cross recessed round head wood screwDIN 7996
Cross recessed raised countersunk (flat) head wood screwDIN 7997
Self Drilling screw for fiber cement boardDIN 18182

Rivets

Plain rivetDIN 660, PN 82952, GOST 10299-80
Countersunk head rivetDIN 661, PN 82954, GOST 10300-80
Blind rivet flat headDIN EN ISO 15977, GOST 15973-2005
Blind rivet countersunkDIN EN ISO 15978, GOST 15974-2005
Tubular rivet flat headDIN 7340, PN 82972, GOST 12639-80
Steel round head rivetsDIN 124
Tubular rivet round headDIN 7340, PN 82973, GOST 12638-80

Shafting Collars

External Retaining RingDIN 471, PN 85111
Internal Retaining RingDIN 472, PN 85111
Circlip For ShaftsDIN 6799, PN 85112
Adjusting rings with set screwDIN 705, PN 85101
Mushroom head rivetPN 82957, GOST 10301-80
Flat round head rivetPN 82958, GOST 10302-80

Pins

Parallel pinISO 2338, EN ISO 2338, DIN EN ISO 2338, PN EN ISO 2338, GOST 3128-70, JIS B 1354 B
Parallel pins, of hardened steelISO 8734, PN EN 22339, JIS B 1355 B
Taper pinISO 2339, EN 22339, DIN EN 22339, PN-84/M-85028, GOST 3129-70
Parallel pin with internal threadISO 8733, EN ISO 8733, DIN EN ISO 8733, PN-84/M-85028, JIS B 1359-1
Taper pin with internal thread, groundISO 8736, EN 28736, DIN EN 28736, PN EN ISO 8733, GOST 9464-79, JIS B 1358
Grooved pin - Half-length centre groovedISO 8743, EN ISO 8743, DIN EN ISO 8743, PN EN 28736, GOST 8743-93
Grooved pin - Full-length taper groovedISO 8744, EN ISO 8744, DIN EN ISO 8744, PN EN ISO 8743, GOST 10773-93
Grooved pin - Half-length taper groovedISO 8745, EN ISO 8745, DIN EN ISO 8745, PN EN ISO 8744, GOST 8745-93
Grooved pin - Half-length reverse-taper groovedISO 8741, EN ISO 8741, DIN EN ISO 8741, PN EN ISO 8745, GOST 8741-93
Grooved pin - One-third-length centre groovedISO 8742, EN ISO 8742, DIN EN ISO 8742, PN EN ISO 8741, GOST 8742-93
Grooved pin - Full-length parallel grooved, with pilotISO 8739, EN ISO 8739, DIN EN ISO 8739, PN EN ISO 8742, GOST 12850.1-93
Grooved pin - Full-length parallel grooved, with chamferISO 8740, EN ISO 8740, DIN EN ISO 8740, PN EN ISO 8739, GOST 12850.2-93
Spring-type straight pin -- Slotted, heavy dutyISO 8752, EN ISO 8752, DIN EN ISO 8752, PN EN ISO 8740, GOST 14229-93, JIS B 2808
Spring-type straight pinsISO 13337, PN EN ISO 8752, JIS B 2808
Spring-type straight pin -- Coiled, standard dutyISO 8750, EN ISO 8750, DIN EN ISO 8750, PN EN ISO 8750, JIS B 2808
Parallel pin with internal threadISO 8735, EN ISO 8735, DIN EN ISO 8735
Grooved pin with round headISO 8746, EN ISO 8746, DIN EN ISO 8746
Cylindrical to unravelDIN 7341, GOST 10774-80

Parallel keys

Parallel key with round ends (both ends) (low)ISO 2491, PN-M-85002, GOST 29175-91
Parallel key with chamfer (low)ISO 2491, PN-M-85002, GOST 29175-91
Parallel key with round end (one end) (low)ISO 2491, PN-M-85002, GOST 29175-91
Keyway on shaftISO 2491, DIN 6885, PN-M-85005, GOST 23360
Parallel key with round endDIN 6885, PN-M-85005, GOST 23360
Parallel key with chamferDIN 6885, PN-M-85005, GOST 23360
Parallel key with half-length centre holeDIN 6885, PN-M-85005
Parallel key with chamfer, half-length centre holeDIN 6885, PN-M-85005
Parallel key with round end, double holes (friction-fit)DIN 6885, PN-M-85005
Parallel key with chamfer double holes (friction-fit)DIN 6885, PN-M-85005
Parallel key with round end, half-length centre hole (low)DIN 6885
Woodruff keyDIN 6888
Parallel key with round end, double holesPN-M-85005
Parallel key with chamfer, double holesPN-M-85005
Parallel key with round end (one end)PN-M-85005, GOST 23360
Parallel key with round end (friction-fit)PN-M-85005
Parallel key with round end (both ends) (high)PN-M-85001, GOST 10748-79
Parallel key with chamfer (high)PN-M-85001, GOST 10748-79
Parallel key with round end (one end) (high)PN-M-85001

Keys

Round ends Taper Key (both ends)ISO R 773, DIN 6886, PN-M-85031, GOST 24068-80
Taper key with chamferISO R 773, DIN 6886, PN-M-85031, GOST 24068-80
Round end Taper Key (one end)ISO R 773, PN-M-85031, GOST 24068-80
Taper key with gib headISO R 774, DIN 6887, PN-M-85031, GOST 24068-80
Round ends flat key (both ends)ISO 2492, PN 85035, GOST P 50536-93
Flat key with chamferISO 2492, DIN 6883, PN 85034, GOST P 50536-93
Round end plain key (one end)ISO 2492, PN 85035, GOST P 50536-93
Plain key with gib headISO 2492, PN 85034, GOST P 50536-93
Gib-head saddle keyDIN 6889, PN 85036
Concave, rounded wedge PN 85037
Concave cut wedge PN 85036
Concave wedge rounded on one sidePN 85037

Centering hole

Centering hole type AISO 6411, DIN 332, PN-M-02499, GOST 14034
Centering hole type BISO 6411, DIN 332, PN-M-02499, GOST 14034
Centering hole type RISO 6411, DIN 332, PN-M-02499, GOST 14034
Centering hole type CDIN 332, GOST 14034
Centering hole type DDIN 332
Centering hole type EGOST 14034
Centering hole type FGOST 14034
Centering hole type TGOST 14034

Sealing rings

Sealing ringsDIN 7603, PN-M-73060 A
O-ringsISO 3601-1, DIN 3771, PN-M-73060 G, GOST 9833, JIS B 2401-1
Radial Oil Seal type 1ISO 6194-1, DIN 3760 A, PN-M-73067, GOST 8752-1, JIS B 2402-1
Radial Oil Seal type 4ISO 6194-4, DIN 3760 AS, PN-M-73067, GOST 8752-2, JIS B 2402-4

Plain shaft bearings

Flanged bushingISO 4379, DIN ISO 4379, PN-M-87250 B
Cylindrical bushingISO 4379, DIN ISO 4379, PN-M-87250 A
Flanged bushingISO 2795, DIN 1850 V, PN-93/M-61251
Cylindrical bushingISO 2795, DIN 1850 J, PN-93/M-61251
Flanged bushingISO 4247
Cylindrical bushingISO 4247
Flanged bushing type ADIN 172
Flanged bushing type BDIN 172
Cylindrical bushing type ADIN 179
Cylindrical bushing type BDIN 179

Nuts groove bearings

Rolling bearings - LocknutsISO 2982-2, DIN 981, GOST 8530
Slotted Round NutDIN 1804, PN-M-82471

Rolling bearings

Needle roller thrust bearing with trough inner ring, cagedISO 3245, PN-M-86295-1, GOST 4060-78
Needle roller thrust bearing with blind inner ring, cagedISO 3245, DIN 618, PN-M-86295-3, GOST 4060-78
Needle roller thrust bearing with trough inner ring, without cageISO 3245, DIN 618, PN-M-86295-2, GOST 4060-78
Needle roller thrust bearing with blind inner ring, without cageISO 3245, PN-M-86295-4, GOST 4060-78
Tapered roller bearing - metricISO 355, DIN-ISO 355, PN-ISO 355, GOST 27365-87
Single row deep groove ball bearingDIN 625, PN-M-86100-1, GOST 8338-75
Ball bearing with one shieldDIN 625, PN-M-86100-2, GOST 7242-81
Ball bearing with two shieldsDIN 625, PN-M-86100-3, GOST 7242-81
Ball bearing with one rubber sealDIN 625, PN-M-86100-4, GOST 8882-75
Ball bearing with two rubber sealsDIN 625, PN-M-86100-5, GOST 8882-75
Ball Bearing with snap ring groove on outer ringDIN 625
Thrust ball bearing with snap ring groove on outer ringDIN 711, PN-M-86261-1, GOST 7872-89
Thrust ball bearing with snap ring groove on outer ring and washerDIN 711, PN-M-86261-2, GOST 7872-89
Angular contact ball bearing - Single-direction - 72 i 73 catalogueDIN 628, PN-M-86160-1, GOST 831-75
Angular contact ball bearing - Dual directions - QJ19, QJ10, QJ2 and QJ3 catalogueDIN 628, PN-M-86160-2, GOST 8995-75
Angular contact ball bearing - Dual directionsDIN 628, PN-M-86160-6
Self-aligning ball bearingDIN 630, PN-M-86130-1, GOST 28428-90
Self-aligning ball bearing with tapered boreDIN 630, PN-M-86130-2, GOST 28428-90
Single row thrust cylindrical bearingDIN 722, PN-M-86420-1, GOST 23526-79
Double row full complement cylindrical roller bearing NNU49 designDIN 5412, PN-M-86208-1, GOST 7634-75
Double row full complement cylindrical roller bearing NNU49K designDIN 5412, PN-M-86208-2, GOST 7634-75
Double row full complement cylindrical roller bearing NN30 designDIN 5412, PN-M-86208-3, GOST 7634-75
Double row full complement cylindrical roller bearing NN30K designDIN 5412, PN-M-86208-4, GOST 7634-75
Double row tapered roller bearingDIN 635, PN-M-86240-1, GOST 5721-75
Double row tapered roller bearing with tapered boreDIN 635, PN-M-86240-2, GOST 5721-75
Double row tapered roller bearing with tapered bore with pull inner ringDIN 635, PN-M-86240-3, GOST 5721-75
Ball bearing with tapered borePN-M-86100-8
Angular contact ball bearing - Single-direction - cataloguePN-M-86160-3, GOST 831-75
Angular contact ball bearing - Dual directions - cataloguePN-M-86160-4, GOST 8995-75
Angular contact ball bearing - Dual directions - QJ19, QJ10, QJ2 and QJ3 cataloguePN-M-86160-5
Single row cylindrical roller bearingPN-M-86180-1, GOST 8328-75
Single row cylindrical roller bearing NJ designPN-M-86180-2, GOST 8328-75
Single row cylindrical roller bearing N designPN-M-86180-3, GOST 8328-75
Single row cylindrical roller bearing NUP designPN-M-86180-6, GOST 8328-75
Cylindrical roller bearing without inner ring RN designPN-M-86180-7
Double row thrust cylindrical bearingPN-M-86420-2, GOST 23526-79
Multi-row cylindrical roller bearing, cagedPN-M-86208-5
Multi-row cylindrical roller bearing, without cagePN-M-86208-6, GOST 7634-75

Clevis pins

Clevis pin with head and (with or without split pin hole)ISO 2341, EN 22341, DIN-EN 22341, PN-EN 22341, GOST 9650
Clevis pin without head (with or without split pin hole)ISO 2340, EN 22340, DIN-EN 22340, PN-EN 22340, GOST 9650

Split pin

Split pinISO 1234, EN ISO 1234, DIN-EN ISO 1234, PN-EN ISO 1234, GOST 397, JIS B 1351

Screw plugs

Hex head screw plug type BDIN 908, PN-M-73124
Hex head screw plug type APN-M-73124

Lubricators

Lubricating nipple, cone type - tapered threadDIN 71412, PN 86002, GOST 19853
Lubricating nipple, cone type - cylindrical threadDIN 71412, PN 86002
Angle Lubricating nipple, cone type - tapered threadDIN 71412, PN 86003, GOST 19853
Angle Lubricating nipple, cone type - cylindrical threadDIN 71412, PN 86003

Fasteners -- Ends of parts with external ISO metric thread

Chamfered end (CH)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
As-rolled end (RL)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
Rounded end (RN)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
Flat point (FL)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
Short dog point (SD)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
Long dog point (LD)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
Cone point (CN)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
Truncated cone point (TC)ISO 4753, EN ISO 4753, DIN-EN ISO 4753
Cup point (CP)ISO 4753, EN ISO 4753, DIN-EN ISO 4753

Springs

Compression spring
Disc spring

Screw Connection

Connection (Hexagon head bolt and nut)
Connection (Countersink + Hexagon socket head cap screw and nut)
Connection (Hexagon socket head cap screw + nut)

Steel Shapes

Flat steel bar (Hot rolled)ISO 1035-3, DIN-EN 10058:2004U, EN 10058:2004U, PN-EN 10058:2004U, GOST 103-2006

Steel Shapes

L-shape equal anglesISO 657-1, ASTM A6/A6M, DIN-EN 10056-1:2000, EN 10056-1:2000, PN-EN 10056-1:2000, GOST 8509-93, IS 808, JIS G 3192
L-shape unequal anglesISO 657-2, ASTM A6/A6M, DIN-EN 10056-1:2000, EN 10056-1:2000, PN-73/H-93460.01, GOST 8510-86, IS 808, JIS G 3192
L-shape unequal anglesPN-EN 10056-1:2000, GOST 19772-93, JIS G 3192-1
L-shape unequal anglesJIS G 3192-2
L-shape equal anglesGOST 19771-93

Steel Shapes

C-shape (hot rolled)ASTM A6/A6M
U-shape (economic)DIN 1026-2:2002-10, PN-71/H-93451, GOST 8240-97, IS 808
U-shape (rolled)ISO 657-11, DIN 1026-1:2000-3 , PN-86/H-93403, GOST 8278-83, JIS G 3192
U-shape (hot rolled)PN-H-93400:2003, GOST 8240-97, IS 808
U-shape (yield strength over 490 MPa)PN-73/H-93460.04

Steel Shapes

T-shape (hot rolled)ISO 657-21, DIN-EN 10055:1999, EN 10055:1999, PN-EN 10055:1999, JIS G 3192

Steel Shapes

Z-shapeDIN 1027:2004-04 JIS G 3350B
Z-shape (yield strength over 490 MPa)PN-73/H-93460.08
Z-shape (yield strength up to 490 MPa)PN-73/H-93460.07

Steel Shapes

I-shape (Hot rolled)ISO 657-15, GOST 8239-89, JIS G 3192 I
I-shape (Hot rolled)DIN 1025-1
Hot rolled I-beams - Part 5 IPE-serieDIN 1025-5
Hot rolled I-beams - Part 2 HEB-serieDIN 1025-2
Hot rolled I-beams - Part 3 HEA-serieDIN 1025-3
Hot rolled I-beams - Part 4 HEM-serieDIN 1025-4
H-shape (Hot-rolled parallel-flange steel IPE - Dimensions)PN-H-93419
H-shape (Hot rolled wide-flange steel beams - Dimensions)DIN 1025, PN-H-93452, GOST 26020-83, IS 808, JIS G 3192 H
I-shape ASTMIS 808
W-shape ASTMASTM A6/A6M
M-shape ASTMASTM A6/A6M
S-shape ASTMASTM A6/A6M
HP-shapeASTM A6/A6M
Steel I-beams and special steel channelsGOST 19425-74

Steel Shapes

Welded round structural tubing (Cold formed welded structural hollow sections)ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 10704-91
Welded square structural tubing (Cold formed welded structural hollow sections)ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 30245-2003
Welded rectangular structural tubing (Cold formed welded structural hollow sections)ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 30245-2003
Seamless cold drawn tubesDIN-EN 10305-1:2011, EN 10305-1:2011, PN-EN 10305-1:2011, GOST 8734-75
Welded cold drawn tubesDIN-EN 10305-2:2011, EN 10305-2:2011, PN-EN 10305-2:2011, GOST 10707-80
Welded cold sized tubesDIN-EN 10305-3:2011, EN 10305-3:2011, PN-EN 10305-3:2011, GOST 9567-75
Seamless cold drawn tubes for hydraulic and pneumatic power systemsDIN-EN 10305-4:2011, EN 10305-4:2011, PN-EN 10305-4:2011
Welded square structural tubing (For precision applications)DIN-EN 10305-5:2011, EN 10305-5:2011, PN-EN 10305-5:2011, GOST 8639-82, JIS G-3466
Welded rectangular structural tubing (For precision applications)DIN-EN 10305-5:2011, EN 10305-5:2011, PN-EN 10305-5:2011, GOST 8645-68, JIS G-3466

Steel Tubes

Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and ShapesASTM A500

Steel Shapes

Welded square structural tubingISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-1:2006
Welded round structural tubingISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-2:2006
Welded rectangular structural tubingISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-5:2006

Steel Bars

Round stainless steel bar (Hot rolled)ISO 1035-1, DIN-EN 10060:2006P, EN 10060:2006P, PN-EN 10060:2004U, GOST 2590-2006
Square steel bar (Hot rolled)ISO 1035-2, ANSI AISC, DIN-EN 10059:2005P, EN 10059:2006P, PN-EN 10059:2004U, GOST 2591-2006
Hexagon steel bar (Hot rolled)DIN-EN 10061:2006P, EN 10061:2006P, PN-EN 10061:2004U, GOST 8560-88

Steel Rods

Round steel rodDIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191A
Square steel rodDIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191B
Rectangular steel rodDIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3194
Hexagon steel rodDIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191C

Steel Tubes

Seamless steel tube for pressure purposesDIN-EN 10216:2004, EN 10216:2004, PN-EN 10216:2004
Non-alloy steel tube for liquid purposes (including water)DIN-EN 10224:2006, EN 10224:2006, PN-EN 10224:2006
Non-alloy steel tubes suitable for welding and threadingDIN-EN 10255:2004
Seamless and welded steel tubesDIN-EN 10220:2003
Carbon steel tube suitable for screwingPN-H-74200:1998
General-purpose seamless steel tubePN-H-74220:1984
Electrically welded steel tubesGOST 10704-91
Water supply steel pipesGOST 3262-75
Seamless steel tubesGOST 550-75
Seamless hot deformed steel pipesGOST 8732-78
Seamless steel tubes cold deformedGOST 8734-75
Seamless hot deformed steel pipesGOST 9940-81
Seamless cold deformed tubesGOST 9941-81

Aluminium Shapes

L-shapeDIN-EN 573, EN 573, PN-EN 573, GOST 13618-97

Aluminium Shapes

U-shapeDIN-EN 573, EN 573, PN-EN 573

Aluminium Shapes

T-shapeDIN-EN 573, EN 573, PN-EN 573, GOST 13622-91

Aluminium Shapes

I-shapeDIN 1025-5, GOST 13621-90

Aluminium Shapes

Z-shapeGOST R 50067-92
Z-shapeGOST 13620-90

Aluminium profiles

Profil 45 x 45

Flanges

Welding neck flanges ANSI 150lb/sq.in. Up to 12''ANSI 150lb/sq.in.
Welding neck flanges ANSI 150lb/sq.in. Over 12''ANSI 150lb/sq.in.
Welding neck flanges ANSI 300lb/sq.in. Up to 12''ANSI 300lb/sq.in.
Welding neck flanges ANSI 300lb/sq.in. Over 12''ANSI 300lb/sq.in.
Welding neck flangesDIN 2632
Welding neck flangesDIN 2633
Welding neck flangesDIN 2634
Welding neck flangesDIN 2635
Welding neck flangesDIN 2636
Blind flange Form BDIN 2527 Form B, ISO 7005-1
Blind flange Form TDIN 2527 Form T
Blind flange Form EDIN 2527 Form E
Flat flange for welding Form ADIN 2573 Form A, ISO 7005-1
Flat flange for welding Form BDIN 2573 Form B
Flat flange for welding Form ASDIN 2573 Form AS
Flat flange for welding Form BSDIN 2573 Form BS
Flat flange for welding Form ADIN 2576 Form A
Flat flange for welding Form BDIN 2576 Form B
Flat flange for welding Form AS
Flat flange for welding Form BSDIN 2576 Form BS
Lapped flanges Plain collarsDIN 2641
Lapped flanges Plain collarsDIN 2642
Welding Flanges for Pressure Vessels Forms ADIN 28031
Welding Flanges for Pressure Vessels Forms BDIN 28031
Welding Flanges for Pressure Vessels Forms DDIN 28032
Welding Flanges for Pressure Vessels Forms FDIN 28032
Welding Flanges for Pressure Vessels Forms NDIN 28032
Welding Flanges for Pressure Vessels Forms VDIN 28032
Welding Flanges for Pressure Vessels Forms RDIN 28032
Welding Flanges for Pressure VesselsDIN 28036
Welding neck flangesDIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1, GOST 12821-80
Flat flangeDIN-EN 1092-1, EN 1092-1:2001, ISO 7005-1, PN-EN 1092-1
Blind flangeDIN-EN 1092-1, EN 1092-1, PN-EN 1092-1
Loose plate flanges with weld-on plate collarDIN-EN 1092-1, EN 1092-1, PN-EN 1092-1
Loose plate flanges with weld-neck collarDIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1
Hubbed slip-on flangesDIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1
Hubbed threaded flangesDIN-EN 1092-1, EN 1092-1, PN-EN 1092-1
Oval flangesDIN 2561
Hubbed Socket Welding FlangeISO 7005-1
Loose Plate Flange with Weld-On Plate CollarISO 7005-1

Flanges\Grey iron flanges

Blind flange Type ADIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Blind flange Type BDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Hubbed threaded flangesDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Integral flangeDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2

Flanges\Ductile iron flanges

Welding neck flangesDIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2
Blind flange Type ADIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2
Blind flange Type BDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Loose plate flanges with weld-neck collarDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Hubbed slip-on flangesDIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2
Hubbed threaded flangesDIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2
Integral flangeDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2

Flanges\Malleable iron flanges

Blind flange Type ADIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Blind flange Type BDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Hubbed threaded flangesDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2
Integral flangeDIN-EN 1092-2, EN 1092-2, PN-EN 1092-2

Fittings

Elbow 45°ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83
Elbow 90°ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83
Elbow 180°ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83
Reducing elbow 90°ANSI B 16.9 2007, ASME B 16.9 2007
TeeANSI B 16.9 2007, ASME B 16.9 2007, GOST 17376-2001
Reducing TeeANSI B 16.9 2007, ASME B 16.9 2007
Reducing CrosseANSI B 16.9 2007, ASME B 16.9 2007
Eccentric reducer with reduced pressure factorANSI B 16.9 2007, ASME B 16.9 2007
Tee DIN 2615 style ADIN 2615
Tee DIN 2615 style BDIN 2615
Eccentric reducer with reduced pressure factorDIN 2616-1
Eccentric reducer with reduced pressure factorDIN 2616-2
Branch saddlesDIN 2618
Asymmetrical reducerGOST 17378-2001
Symmetrical reducerGOST 17378-2001

Steel pipes

Stainless steel pipeASME B36.19M-2004, DIN 10297-1
Welded and seamless wrought steel pipeASME B36.10M-2004
Steel pipe suitable for screwingDIN 2440
Seamless steel tubesDIN 2448 GOST 550-75
Seamless steel tubes hydraulicDIN 2445
Welded steel tubesDIN 2458
Stainless steel pipeDIN 2462, ISO 1127
Non-alloy steel tubes suitable for welding and threadingDIN-EN 10255:2004, EN 10255:2004, PN-EN 10255:2004
Non-alloy steel pipeEN 10224:2006, PN 10224:2006
Seamless steel pipe for pressure purposesEN 10216:2004, PN 10216:2004
Seamless and welded steel tubesISO 4200
Seamless and Welded Austenitic Stainless Steel PipesASTM A312/A312M-09
Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessASTM A53/A53M-07
Seamless Carbon Steel Pipe for Atmospheric and Lower TemperaturesASTM A524-96
Stainless Steel Welded Round TubeASTM A269
Stainless steel pipe, with threadPN-H-74200:1998
General-purpose seamless steel tubePN-H-74220:1994
Seamless steel tube for pressure purposesGOST 11017-80
Electrically welded steel tubesGOST 10704-91
Precision steel tubesGOST 9567-75
Seamless hot deformed steel pipesGOST 9940-81
Seamless cold deformed tubesGOST 9941-81

Dished ends

Torospherical dished endsDIN 28011
Torospherical dished endsDIN 28013
Steel butt-welding pipe fittingsDIN 2617

Heat exchangers

Heat exchanger DIN 28184-1 - 2 beamsDIN 28184-1
Heat exchanger DIN 28184-2 - 2 beamsDIN 28184-2

Drives and control:

ISO 1219-1

Hydraulic Source of Energy Direction
Path of fluid through valve
Rotary motion
Variability pump, motor etc.
Electric
Closed path or port
Opposing Linear Actuators Limited Angle of Motion
Temperature Indication or control
Prime mover
Spring
Restrictor
Place for including Non-Return valve symbol
Junctions
Flexible
Piston rod
Shaft
Shaft -two ways rotate
Detent positioning limited angle of motion
Locking device or control
Over centre device to prevent stopping on dead centre
Non-specific control
Push button control
Pull button control
Push-Pull button control
Lever control
Pedal control
Treadle control
Plunger control
Plunger control with adjustable lenght
Two way function spring
Two way roller control
Roller control
Solenoid controller 1-winding
Solenoid controller 2-winding
Solenoid controller 2-winding assembly
Electric motor
Piezoelectric component
Pressure controller
Operate valve by differential pressure area
Internal pilot path
External pilot path
Hydraulic pilot (Direct) (steering by application of pressure)
Hydraulic pilot (Direct) (steering by release hydraulic pressure)
Oil Pressure Controller (via Control) (steering by application of pressure)
Oil Pressure Controller (via control) (steering by release hydraulic pressure)
Oil Pressure-indirectly Controller (via Control) (steering by application of pressure)
Oil Pressure-indirectly Controller (via Control) (steering by release hydraulic pressure)
2-Stage hydraulic pilot
Solenoid Operated pilot Valve-Exhaust pilot stage
Solenoid Operated pilot Valve
Pneumatic and Pilot Stage - Pilot Drain
Solenoid Control Hydraulic Pilot Spring Cantered External Pilot Supply Drain
External feedback
Internal feedback
Hydraulic motor
Fixed capacity with one direction of flow - pump
Hydromotor
Fixed Capacity Bi-Directional Output motor - pump
Hydropumpe/-motor
Variable Capacity (with Undefined Control Mechanism One Direction of Flow) - pump/motor
Fixed Capacity Unit-Directional Output
Variable Capacity (with Hand Control Mechanism Two Directions of Flow) - pump/motor
Hydraulic variable speed drive unit
Pressure-compensated variable pump
Variable pump motor
Single-acting retraction cylinder
Double-acting hydraulic cylinder
Double-acting telescopic hydraulic cylinder
Pneumatic- hydraulic actuator
Pneumatic- hydraulic, continuous operations
Pressure intensifier
Pressure intensifier, continuous operations
Accumulator
Accumulator-Fluid Maintained Under Pressure by Inert Gas
Prime mover, Non-electric
Transient position
Position opposite, extreme positions
Extreme position opposite, middle (neutral)
Directional control valve — with manual control
Directional control valve 2/2, — with lever control
Directional control valve 2/2, — with lever control, with return spring
Directional control valve 3/2, - with roller control, with return spring
Directional control valve 4/2, - with button control, with return spring
Directional control valve 3/3, - with solenoid control, spring centred
Directional control valve 4/3, - with button control, spring centred
Directional control valve 5/3, - 2 stage solenoid and increase pressure, spring centred
Directional control valve 2/2, - with support valve pre-control
Directional control valve 3/2, - with solenoid control, with return spring
Directional control valve 5/2, - with pressure control
Directional control valve 4/3, pre-control
Directional continuous control valve (open), middle (neutral) position
Servo-valve
Shuttle-off valve — free
Shuttle-off valve — free (Simplified symbol)
Shuttle-off valve — spring loaded
Shuttle-off valve — spring loaded (Simplified symbol)
Shuttle-off valve — pilot controlled
Shuttle-off valve — pilot controlled (Simplified symbol)
Shuttle-off valve — pilot controlled, spring loaded
Shuttle-off valve — pilot controlled, spring loaded (Simplified symbol)
Shuttle valve
Shuttle valve (Simplified symbol)
Priority shuttle valve
Priority shuttle valve (Simplified symbol)
Rapid exhaust valve
Rapid exhaust valve (Simplified symbol)
Pressure relief valve, single-stage (Simplified symbol)
Pressure relief valve, two-stage
Pressure sequence valve
Pressure relief valve, electrically operated
Reducing valve - pressure regulator, single-stage
Reducing valve - pressure regulator, two-stage
Reducing exhaust valve
Throttle valve, with manual control
Throttle valve
Gate valve
Adjustable restrictor valve, — with mechanical control against a return spring
One way restrictor valve
Series flow control valve
Series flow control valve (Simplified symbol)
Compensated flow control valve
Compensated flow control valve (Simplified symbol)
Flow control valve — with fixed output and relief port to reservoir
Flow control valve — with fixed output and relief port to reservoir (Simplified symbol)
Vented reservoir open to atmosphere
Vented reservoir with inlet pipe above fluid level
Vented reservoir — with inlet pipe below fluid level
Pressurized reservoir
Filter or strainer
Eingießfilter
Ansaugfilter
Air Filter
Pressure indicator
Pressure gauge
Differential pressure gauge
Liquid level gauge
Thermometr
Flow indicator
Flow meter
Integrating flow meter
Tachometer
Torque meter
Pressure switch
Limit switch
Analog transducer
Pneumatic Source of Energy -direction
Air bleed
Air bleeds (momentary)
Air bleed - adjustable (momentary)
Air exhausts port — plain with no provision for connection
Air exhaust port — threaded for connection
Self-sealing coupling (— connected, without mechanically opened non-return valve)
Self-sealing coupling (— unconnected, without mechanically opened non-return valve)
Self-sealing coupling (— connected, with mechanically opened non-return valves)
Self-sealing coupling (— unconnected, with mechanically opened non-return valves)
Angular/Rotary connection — one way
Angular/Rotary connection — three ways
Pneumatic pilot (Direct) (steering by application of pressure)
Pneumatic pilot (Direct) (steering by release pneumatic pressure)
Pneumatic pilot (Directional valve) (steering by application of pressure)
Pneumatic pilot (Directional valve) (steering by release pneumatic pressure)
Pneumatic Pressure-indirectly controller (via Control) (steering by application of pressure)
Pneumatic Pressure-indirectly controller (via Control) (steering by release hydraulic pressure)
Combined control — by solenoid and pilot Valve-Exhaust pilot stage
Combined control — by solenoid and pilot directional valve
2-Stage Hydraulic and Pneumatic Pilot drain
Pneumatic motor
Pneumatic motor - variable capacity
Pneumatic motor - fixed capacity, — with two directions of flow
Pneumatic motor - variable capacity, — with two directions of flow
Air compressor
Pneumatic semi-rotary actuator (Oscillating motor)
Single-acting pneumatic extension cylinder
Single-acting pneumatic retraction cylinder
Double-acting pneumatic cylinder
Double acting-Fixed cushion at full area side only - cylinder
Double acting-Adjustable Cushioning at both ends - cylinder
Single acting Telescopic - cylinder
Double acting-Double Piston Rod - cylinder
Rodless cylinder
Pneumatic impact cylinder
Tandem cylinder
Four Acting-Double Piston Rod -built in position controller
Double Acting-Double Piston Rod -built in position controller
Rodless cylinder adjustable cushioning, magnetic
Cable cylinder
Double acting piston Rod with pneumatic brake
Air spring actuator
Pneumatic- hydraulic acturator
Reserve air receiver
Air receiver
Prime mover, Non-eletric
Extreme position opposite, middle ( neutral)
Directional control valve 5/3, - 2 stage solenoid, increase pressure, spring centred
Directional control valve 3/2, - controlled by solenoid with return spring
Directional control valve 5/2 — controlled by pressure in both directions
Directional continuous control valve (close), middle (neutral) position
Pressure regulator
Pressure reducing valve
Adjustable restrictor valve, — with mechanical control against a return spring (Simplified symbol)
Shut-off valve
Throttle valve — with mechanical control against a return spring (braking valve)
Flow divider valve
Filter with additional magnetic element
Filter with contamination indicator
Filter with manual drain
Filter with separator, automatic drain
Filter with separator, manual drain
Air dryer
Lubricator
Conditioning unit
Conditioning unit (Simplified symbol)
Cooler — without representation of the flow lines of the coolant
Cooler — indicating the flow lines of the coolant
Heater (arrows in the diamond indicate the introduction of heat)
Temperature controller
Pulse counter with electric output signal
Pulse counter with pneumatic output signal
Volumenstromanzeige
Druckschalter
Silencer
Symbols control methods - one way acting
Controlling valves with three or more positions
Symbols of control mechanisms with three positions
Controlling by pressure in middle (neutral) position
Elements indirectly controlled
Combined control - by 2 independent control (push-poll button solenoid)
Combined control - by 2 dependent control (solenoid pilot directional valve)
Rasten werden in der gleichen Anzahl
Safety mechanism, protection against overloading technological flow
Safety mechanism, protection against overloading return technological flow
Safety mechanism, protection against overloading every technological flow
Safety mechanism, protection against overloading 2 directions technological flows
Safety mechanism, protection against overloading return stagnancy technological flows
Safety mechanism, protection against overloading return stagnancy-return technological flows
Safety mechanism, protection against overloading technological and stagnancy
Stop in technological flow possible return flow
Stop in return flow possible technological flow
Stop in all flows
Adjustable in technological flow
Adjustable in return flow
Adjustable in all flow
Upholding after technological flow
Upholding after return flow
Upholding after any flow
Setting less accurate technological flow
Setting less accurate return flow
Setting less accurate all flows
Setting accurate and stabilizes technological flow
Setting accurate and stabilizes return flow
Setting accurate and stabilizes all flows
Protection in technological flow
Protection in return flow
Protection in all flow
Blockade after technological flow
Blockade after return flow
Blockade after any flow
Mechanical control of servomotor
Electrical control of servomotor
Dividers proportionate
Flow Dividers - one stage
Flow Dividers - two stages
Individual station for one performance at the same pressure safety
Individual station for one performance at two pressure safety
Individual station with two capacities at the same pressure safety
Individual station with two capacities at two safety pressures
Engine, fixed capacity, — with one direction of flow
Element, fixed capacity, — with two directions of flow
Pomp, variable capacity, — with one direction of flow
Engine, variable capacity, — with one direction of flow
Element, variable capacity, — with one direction of flow
Element, variable capacity, — with two directions of flow
Engine with two directions of flow, - with smooth change of capacity

Logical fluid circuits, binary logic symbols:

ISO 5784-1

Logical Element
Symbol qualifier functions AND/OR figures
Connecting symbols
Direction of the flow of information
Deployment of INPUT and OUTPUT
NOT
Entry negation
Entry blocking
Entry blocking - negation
Entry static
Entry dynamic, for which the dynamic state of 1 means the transition from 0 to 1
Entry dynamic, for which the dynamic state of 1 means the transition from 1 to 0
''YES''
''NOT''
''AND''
''OR''
Elements of processing power
Gauge
Shuttle-off valve, connection, and roll
Engine or a pump with a limited rotate angle
Control element
Conditioners
Gewicht im Speicher
Cylinder
Piston
Some ways to control
Braking
Receiver
Receiver, Accumulator
Open way of flow
Open way of primary flow
Way of flow
Shut-off way of flow
Two ways of flow
Three way of flow
Three way of flow - Shut-off
Four way of flow
Four way of flow - combined internally
All way of flow - Shut-off
Five way of flow

Connection line

Connection
Intersection without a connection
Connection point

Hydraulic and pneumatic lines:

Operating line
Control cable
Control line
Draw elements which are assembled
Mechanical connections

Line types - cables:

Continuous
Border
Center
Dashdot
Dashed
Hidden
Flex
Circulation
Piping, insulated
Piping, heated or cooled and insulated
Insulation
Piping, heated or cooled
Parallel Dot
Parallel
Piping with jacket
Insulation casing pipe
Untreated water
Chemicals
Air
Combustible gases
Non combustible gases
Solid fuels
Combustible waste
Other media
Spiral
Elastic
Elastic dash
Elastic cross
Ribbed pipe
Capillary
Capillary dash
Capillary divide
Liquid metal
Line
Pneumatic
Hydraulic
Elctromagnetic
Mechanical
Software
Electro
Coaxial line
Shielded line
Optical fiber
Digital
Impuls

Line types - general:

Platform
Wall
Beton
Fireclay brick
Ground
Weld
Zone
Band

Joint signs and welding processes:

Welded, brazed and soldered connections.
Welds view
ISO 2553
Welding and similar processes.ISO 4063

Marks:

Surface roughnessISO 1302
ToleranceISO 1101
Quick leader - Curved arrow
EdgeISO 13715
Projection methodsISO 5456
ConeISO 3040
Measuring pointDIN 6773
Reference arrowISO 128
Centre holeISO 6411
Zigzag line

Joint schemes:

Connection (Hexagon head bolt and nut)PN-81/N-01613
Screw connection (drill only)ISO 5845
Elongated holeISO 5261
Holes
Rivets
Rivet connection (drill only)ISO 5845