CADprofi 7.01

We would like to inform that CADprofi 7.01 (previously CP-System) is available.

From version 7.0 CP-System is renamed as CADprofi.
Below you can find a quick overview of CADprofi 7.01 changes:

Extended functionalities of schemes editor

  • Additional features allowing to quickly insert multiple symbols.
  • Simplified insertion of wires intersections.
  • Additional option 'put into point' and 'into extension' allowing precise schematics.
  • Ability to insert symbols description with line references.
  • New mode of instantly drawing lines with option of automatic ending the drawing while connecting to objects (only available in AutoCAD and latest version of Bricscad Pro & GstarCAD).
  • Expandable dialog boxes, thanks to this more symbols can be viewed.
  • Easy way to insert technical parameters for symbols.
  • Option to automatic symbols numbering.
  • New symbols libraries in libraries in all modules (a total of about 2 thousand new symbols for technological installations, P&ID schematics and IEC symbols in the Electrical module).
  • Drawing templates used during creating electrical schematics.
  • Many commands were extended.

 

CADprofi HVAC & Piping (previously – CP-System HVAC & Piping)

  • Extended schematics editor (many additional options and new symbols).
  • New model for line pipes and ducts. Thanks to them it is possible to draw lines with isolation (in case of ducts an inside isolation is available).
  • Rebuilt command to insert parametric armature. Currently when inserting armature it is possible to simultaneously insert different flanges.
  • Rebuilt flanges library according to PN, EN, DIN and ISO standards.
  • Ability to simultaneously insert multiple heaters.
  • Several lines allowing drawing many installations according to ISO and DIN standards were added in command "line schematics".

 

CADprofi Electrical (previously - CP-System Electrical)

  • Extended schematics editor (many additional options and new symbols).
  • New dialog box for ICE symbols.
  • Automatic numbering of IEC symbols.
  • Automatic marking of IEC symbols endings.
  • Many additional symbols of 2-, 3- and 4- poles.
  • Many one line symbols.
  • Describing symbols when inserting them into schematics.
  • New command containing templates for creating electrical schematics including line templates.
  • New tables for electrical circuits, for example, when designing the switchgear. From tables, you can create specification that contains description of the circuit, power, type and pipe length, etc.

 

CADprofi Mechanical (previously - CP-System Mechanical)

  • We have started rebuilding library of standardized elements. Currently we have rebuilt existing standards and we introduced several new ISO, EN, DIN and PN standards for fasteners (bolts, nuts, washers).
  • We have rebuilt libraries that contain additional views (for example for screws we have introduced two side views and a view from the head and from the shaft).
  • We have marked welds according to ISO 2553. We have introduced a standard with numbering processes of weld and welded joint ISO 4063. For welded joint there is a possibility to view welds.
  • Marking roughness according to ISO 1302. We have also left compatibility with roughness marking standards.
  • Marking edges according to SO 13715.
  • Additional markings for example quick reference lines and others.

 

CADprofi Architectural (previously - CP-System Architectural)

  • Additional symbols for escape routes, fire protection and safety.
  • We have rebuilt command containing woodworks. Inserting doors and windows into isometric views automatically hides wall lines. Thank to this wall lines are not broken, Which makes it easier for possibly editing, as well as helps to have full control over the way of displaying wall lines. (In order to hide wall lines you should use the command "display order" in the CAD program).
  • We have introduced possibility to draw windows with jambs.

 

Other changes

  • Program has been adapted to work with AutoCAD 2011, Bricscad V10.3, ZWCAD 2010, GstarCAD 2010, ProgeCAD 2010
  • New installation program fully compatible with Windows 7 (as well as Windows XP and Vista).
  • Additional list of specifications (for example for IEC symbols). In the creator we have introduced a new way to sort the list.
  • Most dialog boxes that included many objects can now be extended, which is very important while working with larger monitors. Thanks to this dialog boxes can also work with lower resolutions (min. 1024x768 pixels).
  • New system of activating and managing licenses (easier management and control over purchased licenses and subscriptions).
  • We have updated Wilo, Efar and Viessmann libraries.

 

You can always download the latest demo version here.
Subscribers can update their programs online.