CADprofi Mechanical content
Here you can easily check CADprofi Mechanical content.
O conteúdo mecânico no CADprofi foi desenvolvido com base em princípios geralmente aceitos e dados técnicos contidos nas normas industriais relevantes. As bibliotecas de símbolos e componentes são objetos CAD proprietários com funcionalidade estendida, projetados para facilitar o design e a criação de documentação mecânica. Esses elementos não constituem reproduções do conteúdo das normas nem de suas representações gráficas — são soluções funcionais desenvolvidas para uso eficaz no ambiente CAD.
As normas mencionadas nas páginas dos produtos são fornecidas apenas como referência aos princípios técnicos gerais e não substituem a utilização de suas publicações oficiais. As soluções aplicadas podem diferir das edições atuais das normas, conter simplificações ou extensões decorrentes da funcionalidade do programa. Recomendamos sempre consultar as edições atuais das normas para verificar a conformidade dos projetos com os requisitos do setor.
| Name | Reference number |
| Search this column by typing the element name... | Search this column by typing the reference number... |
Bolts: | |
| Hexagon head bolt - Product grade A and B | ISO 4014, EN ISO 4014, DIN EN ISO 4014, PN EN ISO 4014, IS 1364-1, BS EN 24014 |
| Hexagon head bolt - Product grade A and B upr | ISO 4014 |
| Hexagon head bolt | ISO 4017, EN ISO 4017, DIN EN ISO 4017, PN-85/M-82105, GOST 7796-70, IS 1364-2, JIS B 1180, BS EN 24017 |
| Hexagon head screws | ISO 4018, IS 1363-2, JIS B 1180 A+B, BS EN ISO 4018 |
| Hexagon head bolt, with fine pitch thread | ISO 8676, EN ISO 8676, DIN EN ISO 8676, PN-85/M-82105, GOST 7796-70, JIS B 1180, BS EN 28676 |
| High-strength hexagon head bolts with large widths | ISO 7412, EN 14399-4, DIN 6914, PN EN 14399-3 |
| System HV - Hexagon fit bolt | EN 14399-8 |
| Hexagon flange head bolt | ISO 4162, EN ISO 4162, DIN 6921, PN 82247 |
| Hexagon socket countersunk head screw | ISO 10642, EN ISO 10642, DIN 7991, PN-EN ISO 10642 |
| Hexagon head bolt - Product grade C | ISO 4016, ANSI B 18.2.1, ASME B 18.2.1, EN ISO 4016, DIN EN ISO 4016, PN EN ISO 4016, IS 1363-1, JIS B 1180 C, BS EN ISO 4016 |
| Hexagon head bolt - Product grade B - Reduced shank | ISO 4015, EN 24015, DIN EN 24015, PN-EN 24015, BS EN ISO 4015 |
| Hexagon socket head cap screw | ISO 4762, EN ISO 4762, DIN EN ISO 4762, PN-EN ISO 4762, GOST 11738-84, IS 2269, BS 4168 |
| Countersunk flat niob bolt with cross recess type H | ISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80, IS 7486, JIS B 1111, BS EN ISO 7047 |
| Countersunk flat niob bolt with cross recess type Z | ISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80, IS 7486, JIS B 1111, BS EN ISO 7047 |
| Slotted raised countersunk head screw | ISO 2010, EN ISO 2010, DIN-EN ISO 2010, PN-EN ISO 2010, GOST 17474-80, IS 8911, JIS B 1101, BS EN 2010 |
| Slotted countersunk head bolts | DIN 7969 |
| Hexagon socket head cap screws with centre, with low head | DIN 6912 |
| Hexagon socket head cap screws with low head | DIN 7984 |
| Square head bolt with collar | DIN 478, PN-87/M-82301 |
| Knurled thumb screw with low head | DIN 653, PN-88/M-82457, GOST 21332-75 |
| Knurled thumb screw with high head | DIN 653, PN-88/M-82456, GOST 21331-75 |
| Hexagon head bolt | DIN 7990, IS 6639 |
| Round head niob bolt | DIN 604, PN-91/M-82408, GOST 7785-81 |
| Cup nibbed head bolt | DIN 607, PN-91/M-82410, GOST 7783-81 |
| Eye bolt | DIN 444, PN-77/M-82425, GOST 14724-69 |
| Hexagon socket set screw with Flat Point | DIN 913, PN-EN ISO 4026 |
| Hexagon socket set screw with Cone Point | DIN 914, PN-EN ISO 4027 |
| Hexagon socket set screw with Dog Point | DIN 915, PN-EN ISO 4028 |
| Slotted set screw with long Dog Point | DIN EN 27435 |
| Countersunk raised head screw - with type H | ISO 7046, EN ISO 7046, DIN-EN ISO 7046, PN-EN ISO 7046, GOST 17475-80, IS 7485, JIS B 1111 |
| Countersunk raised head screw - with type Z | ISO 7046, EN ISO 7046, DIN-EN ISO 7046, PN-EN ISO 7046, GOST 17475-80, IS 7485, JIS B 1111 |
| Pan head screw with cross recess type H | ISO 7045, EN ISO 7045, DIN EN ISO 7045, PN-EN ISO 7045, IS 7483 |
| Pan head screw with cross recess type Z | ISO 7045, EN ISO 7045, DIN EN ISO 7045, PN-EN ISO 7045, IS 7483 |
| Slotted countersunk flat head screw | ISO 2009, ANSI B 18.6.3, ASME B 18.6.3, EN ISO 2009, DIN-EN ISO 2009, PN-EN ISO 2009, GOST 17475-80, IS 1365, JIS B 1101 |
| Slotted set screw with cone point | ISO 7434, EN 27434, DIN-EN 27434, PN-EN 27434, GOST 1476-93 |
| Slotted set screws with cup point | EN 27436, DIN EN 27436, PN-EN 27436 |
| Hexagon socket set screw with Cup Point | ISO 4029, EN ISO 4029, DIN-EN ISO 4029, PN-EN ISO 4029, JIS B 1177 |
| Hexagon socket set screw with Cone Point | ISO 4027, EN ISO 4027, DIN-EN ISO 4027, GOST 8878-93, JIS B 1177 |
| Hexagon socket set screw with Flat Point | ISO 4026, EN ISO 4026, DIN-EN ISO 4026, JIS B 1177 |
| Hexagon socket set screw with Dog Point | ISO 4028, EN ISO 4028, DIN-EN ISO 4028, GOST 11075-93, JIS B 1177 |
| Slotted set screws with flat point | ISO 4766, DIN EN ISO 4766 |
| Slotted headless screw with shank | ISO 2342, DIN EN ISO 2342 |
| Cup head square neck bolt with large head | ISO 8677, DIN 603, PN-87/M82406, GOST 7802-81 |
| Hexagon socket head shoulder screw | ISO 7379, ANSI B 18.3.3M, ASME B 18.3.3M |
| Hexagon socket button head screws | ISO 7380-1, EN ISO 7380-1, DIN EN ISO 7380-1, PN EN ISO 7380-1, GOST ISO 7380-1, JIS B 1174 |
| Hexagon socket button head screws with collar | ISO 7380-2, EN ISO 7380-2, DIN EN ISO 7380-2, PN EN ISO 7380-2, GOST ISO 7380-2 |
| Square head bolt with short dog point | DIN 479 |
| Square head bolt with collar and short dog point with rounded end | DIN 480 |
| Hexagon head set screw with small hexagon and dog point | DIN 561 |
| Hexagon head set screw with small hexagon and half dog point and flat cone point | DIN 564 |
| Hexagon fit bolt with long threaded portion | DIN 609, PN-91/M-82342 |
| Hexagon fit bolt with long threaded portion (fine thread) | DIN 609, PN-91/M-82342, IS 3640 |
| Hexagon head bolt with metric fine pitch thread. Product grades A and B | DIN EN ISO 8765 |
| Hexagon fit bolt | DIN 7968 |
| System HV - Hexagon fit bolt | DIN EN 14399-8 |
| Lifting eye bolt | DIN 580, PN-92/M-82472, GOST 4751-73 |
| Lifting eye bolt (fine thread) | DIN 580, PN-92/M-82472 |
| Studs - Metal end 1d | DIN 938 |
| Studs - Metal end 1.25d | DIN 939 |
| Studs - Metal end 2d | DIN 835 |
| Fasteners - Stud bolt | DIN 976-1A |
| T-head bolt with double nib | DIN 188 |
| Square head bolt | PN-88 M-82121, IS 2585 |
| Eye bolt threaded up to the head | PN-77/M-82426 |
| Hexagon fit bolt with short threaded portion | PN-91/M-82341 |
| Hexagon fit bolt with short threaded portion (fine thread) | PN-91/M-82341 |
| Square head set screw with cone point | PN-87/M-82305 |
| High Strength Structural Bolts | IS 3757 |
| Cup head square neck coach bolts | IS 2609 |
| Bolts | |
| Spring-, Fit- and Spacer Unit 244.16 | FIBRO 244.16, FIBRO 244.16 |
| Shoulder screw 244.17 | FIBRO 244.16, FIBRO 244.16 |
Washers | |
| Plain washer - Normal series - Product grade A | ISO 7089, ANSI B 18.22.1, ASME B 18.22.1, EN ISO 7089, DIN 125-1A, PN-78/M-82005, GOST 6958-78, JIS B 1256 |
| Plain washer - Normal series - Product grade C | ISO 7091, ANSI B 18.22.1, ASME B 18.22.1, EN ISO 7091, DIN ISO 7091, PN ISO 7091, GOST 6958-78, JIS B 1256 |
| Plain washer, chamfered - Normal series - Product grade A | ISO 7090, EN ISO 7090, DIN 125-1B, PN-78/M-82006, GOST 11371-78, JIS B 1256 |
| Plain washer - Large series -- Part 1: Product grade A | ISO 7093-1, EN ISO 7093-1, DIN 9021, PN ISO 7093-1, GOST 9649-78, JIS B 1256 |
| Plain washer - Large series -- Part 2: Product grade C | ISO 7093-2, EN ISO 7093-2, DIN ISO 7093-2, PN ISO 7093-2, JIS B 1256 |
| Plain washer - Extra large series -- Product grade C | ISO 7094, EN ISO 7094, DIN ISO 7094, PN ISO 7094, JIS B 1256 |
| Plain washer - Small series - Product grade A | ISO 7092, EN ISO 7092, DIN 433, PN-78/M-82007, GOST 10450-78, JIS B 1256 |
| Plain washer for clevis pins -- Product grade A | ISO 8738, EN 28738, DIN 1440, PN-EN 28738 |
| Plain washer, chamfered, hardened and tempered for high-strength structural bolting | ISO 7416, EN 14399-6, DIN 6916 |
| Disc spring | EN 16983, DIN 2093 |
| Spring lock washer light | DIN 127, PN-77/M-82008, GOST 6402-70 |
| Spring lock washer for screws with cylindrical head | DIN 7980, GOST 6402-70 |
| Spring look washer, heavy duty | DIN 128, GOST 6402-70 |
| Toothed lock washer with internal teeth | DIN 6797J, PN-82/M-82023 |
| Toothed lock washer with external teeth | DIN 6797A, PN-82/M-82024 |
| Serrated lock washer | DIN 6798J, GOST 10462-81 |
| Serrated lock washer | DIN 6798A, GOST 10463-81 |
| Square washer for wood construction | DIN 436, PN-59/M-82010 |
| Square taper washer for U-section 8% | DIN 434, PN-79/M-82018, GOST 10906 |
| Square taper washer for I-section 14% | DIN 435, PN-79/M-82009 |
| Conical spring washer | DIN 6796, GOST 13439-68 |
| Spherical washer C | DIN 6319, PN-78/M-82026, GOST 13438-68 |
| Spherical washer D | DIN 6319, PN-78/M-82026 |
| Washers for clevis pins - Product grade C | DIN 1441 |
| Wave spring washer | DIN 137, PN-82/M-82037 |
| Square taper washers for high-strength | DIN 6917 |
| Square taper washers for high-strength structual bolting of steel channel sections | DIN 6918 |
| Tabwasher with 1 tab | DIN 93, PN-82M-82021, GOST 13463-77 |
| Tabwasher with 2 tabs | DIN 963, PN-82M-82022, GOST 13464-77 |
| Shim ring | DIN 988 |
| Washer for steel constructions | DIN 7989 |
| Plain washers for bolts with heavy clamping sleeves | DIN 7349 |
| Plain washer, chamfered, hardened and tempered for high-strength structural bolting | DIN EN 14399-6, PN-82/M-82039 |
| Spring lock washer | PN-77/M-82008, JIS B 1251 |
| Plain washer | IS 2016 |
| Square washer | JIS B 1256 |
| Plain washer - Normal diameter, Normal thickness - Product grade A | BS 4320 |
| Plain washer - Normal diameter, Light thickness - Product grade B | BS 4320 |
| Plain washer - Large diameter, Normal thickness - Product grade C | BS 4320 |
| Plain washer - Large diameter, Light thickness - Product grade D | BS 4320 |
| Plain washer - Larger diameter, Normal thickness - Product grade E | BS 4320 |
| Plain washer - Larger diameter, Normal thickness - Product grade F | BS 4320 |
| Plain washer - Largest diameter, Larger thickness - Product grade G | BS 4320 |
| Plain washer, chamfered - Normal series - Product grade A and B | BS 4320 |
| Plain washer, chamfered - Normal series - Product grade C and D | BS 4320 |
| Plain washer, Larger than the M68 | BS 4320 |
Nuts | |
| Hexagon nut, style 1 - Product grade A and B | ISO 4032, EN 24032, DIN-EN 24032, PN-EN 24032, GOST 5915-70, JIS B 1181, BS EN 24032 |
| Hexagon nut - Product grade C | ISO 4034, ANSI B 18.2.2, ASME B 18.2.2, EN 24034, DIN-EN 24034, PN-EN 24034, GOST 5927-70, IS 1363-3, JIS B 1181, BS EN 24034 |
| Hexagon nuts, style 2 -- Product grades A and B | ISO 4033, EN ISO 4033, DIN-EN ISO 4033, PN-EN ISO 4033, JIS B 1181, BS EN 24033 |
| Hexagon thin nuts unchamfered (style 0) - Product grade B | ISO 4036, EN ISO 4036, DIN-EN ISO 4036, PN-EN ISO 4036, JIS B 1181, BS EN 24036 |
| Hexagon high nuts (style 2) with metric fine pitch thread -- Product grades A and B | ISO 8674, EN ISO 8674, DIN-EN ISO 8674, PN-EN ISO 8674, JIS B 1181, BS EN 28674 |
| Hexagon nut, style 1, with metric fine pitch thread - Product grade A and B | ISO 8673, EN 28673, DIN-EN 28673, PN-EN 28673, GOST 5915-70, JIS B 1181, BS EN 28673 |
| Hexagon thin nut (chamfered) -- Product grade A and B | ISO 4035, EN 24035, DIN-EN 24035, PN-EN 24035, GOST 5916-70, JIS B 1181, BS EN 24035 |
| Hexagon thin nut (chamfered) with metric fine pitch thread-Product grade A and B | ISO 8675, EN 28675, DIN-EN 28675, PN-EN 28675, GOST 5916-70, JIS B 1181, BS EN 28675 |
| Steel hexagon nuts with large width across flats for high-strength structural bolting | ISO 7414, EN 14399-4, DIN 6915, PN-EN 14399-4 |
| Prevailing torque type hexagon nut (with non-metallic insert), style 1,- Property class 6, 8 and 10 | ISO 10512, DIN 985, PN-52/M-82175 |
| Prevailing torque type hexagon nut with flange (with non-metallic insert)- Product grade A and B | ISO 1666, EN 1666, DIN-EN 1666, PN-EN 1666 |
| Hexagon flange nut | ISO 4161, EN-ISO 4161, DIN-ISO 4161, PN-EN 1661, GOST P 50592-93 |
| Hexagon flange nut | EN 1663, DIN-EN 1663, PN-EN 1663, GOST 8918-69 |
| Hexagon flange nut | EN 1664, DIN-EN 1664, PN-EN 1664 |
| Hexagon flange nut | DIN-EN 1661, PN-ISO 4161 |
| Hexagon flange nut | DIN 6923 |
| Hexagon flange nut with fine thread | EN 1667, DIN-EN 1667, PN-EN 1667 |
| Hexagon sloted and castle nut - type Z | DIN 935, PN-86/M-82148, GOST 5918-73 |
| Hexagon sloted and castle nut - type K | ISO 7035, EN-ISO 7035, DIN 935, PN-86/M-82148, GOST 5918-73 |
| Thin hexagon castle nut, Sloted and Castle nut - type Z | ISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73 |
| Thin hexagon castle nut, Sloted and Castle nut - type K | ISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73 |
| Prevailing torque type hexagon nut | ISO 10511, EN ISO 10511, DIN ISO 10511, PN ISO 10511 |
| Prevailing torque type hexagon nut with fine pitch thread | ISO 10513, EN ISO 10513, DIN ISO 10513, PN ISO 10513 |
| Prevailing torque type hexagon nut | ISO 7040, EN ISO 7040, DIN-EN ISO 7040, PN-EN ISO 7040 |
| Prevailing torque type hexagon nut | ISO 7042, EN ISO 7042, DIN-EN ISO 7042, PN-EN ISO 7042 |
| Prevailing torque type hexagon nut | ISO 7041 |
| Prevailing torque type hexagon nut with flange | ISO 7043 |
| Prevailing torque type hexagon nut with flange | ISO 7044 |
| Prevailing torque type hexagon nut | ISO 7719 |
| Hexagon high nut | DIN 6330, PN-86/M-82155, GOST 15523-70 |
| Hexagon high nut with metric fine pitch thread | DIN 6330, PN-86/M-82155, GOST 15523-70 |
| Hexagon connection nut - height 3 d | DIN 6334 |
| Hexagon nut 1,5d with collar | DIN 6331, PN-87/M-61272 |
| Square nut - type 1 | DIN 557, PN-88/M-82151 |
| Square nut - type 2 | DIN 562, PN-88/M-82151 |
| Knurled thin nut | DIN 467, PN-91/M-82462 |
| Knurled high nut | DIN 466, PN-91/M-82461 |
| Hexagon cap nut | DIN 917, PN-88/M-82182, GOST 11860-85 |
| Hexagon domed cap nut | DIN 1587, PN-88/M-82181, GOST 11860-85 |
| Prevailing torque type hexagon domed cap nuts | DIN 986, PN-64/M-82439 |
| Wing nut | DIN 315, PN-92/M-82472, GOST 3032-76 |
| Lifting eye nut | DIN 582 |
Countersinks | |
| Countersink for countersunk head screw | ISO 7721, DIN 74, PN-87/M-82068 |
| Countersink for hexagon socket head bolt | DIN 974-1, PN-83/M-82069, GOST 12876-67 |
| Countersink for head bolt hexagon and hex nut without washer | DIN 974-2, PN-83/M-82069, GOST 12876-67 |
| Countersink for head bolt hexagon and hex nut with washer | DIN 974-2, PN-83/M-82069, GOST 12876-67 |
| Countersink for countersunk head screw | DIN 66, PN-87/M-82068, GOST 12876-67 |
| Countersink for slotted pan head screws | PN-83/M-82069 |
| Countersink for head bolts hexagon reduced | PN-83/M-82069 |
| Countersink for countersunk self tapping screw | PN-87/M-82068 |
Holes - (through) for screws and bolts | |
| Hole - high quality | DIN EN 20273, GOST 11284-75 |
| Hole - medium quality | DIN EN 20273, GOST 11284-75 |
| Hole - low quality | DIN EN 20273, GOST 11284-75 |
| Blind hole | GOST 12415-80 |
| Elongated hole | |
Taped holes | |
| Taped hole - trough metric | ISO 724, EN ISO 724, DIN-ISO 724, PN ISO 724, GOST 24705-81, JIS B 0205 |
| Taped hole - trough inch | ISO 725, EN ISO 725, DIN-ISO 725, PN ISO 725, JIS B 0206 |
| Taped hole - blind | DIN 76-1, PN-89/M-82063 |
Screws | |
| Slotted pan head screw - Product grade A | ISO 1580, EN ISO 1580, DIN EN ISO 1580, PN EN ISO 1580, GOST 17473-80, IS 6101 |
| Slotted cheese head screw - Product grade A | ISO 1207, EN ISO 1207, DIN EN ISO 1207, PN EN ISO 1207, GOST 1491-80, IS 1366, JIS B 1101 |
| Cross recessed raised countersunk (flat) head tapping screw | ISO 7050, EN ISO 7050, DIN ISO 7050, PN EN ISO 7050, GOST 1145-80, JIS B 1122 |
| Cross recessed raised countersunk (oval) head tapping screw | ISO 7051, EN ISO 7051, DIN ISO 7051, PN EN ISO 7051, GOST 1146-80, JIS B 1122 |
| Slotted raised countersunk (oval) head tapping screw (common head style) | ISO 1483, EN ISO 1483, DIN ISO 1483, PN EN ISO 1483, JIS B 1115 |
| Hexagon head tapping screw | ISO 1479, EN ISO 1479, DIN ISO 1479, PN EN ISO 1479, JIS B 1123 |
| Hexagon flange head tapping screw | ISO 10509, EN ISO 10509, DIN ISO 10509, PN ISO 10509 |
| Slotted pan head tapping screw | ISO 1481, EN ISO 1481, DIN ISO 1481, PN EN ISO 1481, JIS B 1115 |
| Slotted countersunk (flat) head tapping screw (common head style) | ISO 1482, EN ISO 1482, DIN ISO 1482, PN EN ISO 1482, JIS B 1115 |
| Slotted pan head screws with small head | DIN 920 |
| Slotted pan head screws with large head | DIN 921 |
| Slotted pan head screw with small head and full dog point | DIN 922 |
| Slotted pan head screws with shoulder | DIN 923 |
| Slotted raised countersunk head screw with dog point | DIN 924 |
| Slotted countersunk head screw with dog point | DIN 925 |
| Slotted shoulder screws | DIN 927 |
| Slotted raised countersunk (oval) head wood screws | DIN 95 |
| Slotted round head wood screws | DIN 96 |
| Slotted countersunk (flat) head wood screw | DIN 97 |
| Hexagon head wood screws | DIN 571 |
| Hexagon head drilling screw with tapping screw thread with collar | DIN 7504 (K) |
| Slotted hex head self-drilling tapping screw with collar | DIN 7504 (L) |
| Slotted pan head tapping screw | DIN 7971 |
| Slotted countersunk (flat) head tapping screw (common head style) | DIN 7972 |
| Slotted raised countersunk (oval) head tapping screw (common head style) | DIN 7973 |
| Hexagon head tapping screw | DIN 7976 |
| Cross recessed pan head tapping screw | DIN 7981 |
| Cross recessed raised countersunk (flat) head tapping screw | DIN 7982 |
| Cross recessed raised countersunk (oval) head tapping screw | DIN 7983 |
| Cross recessed raised countersunk (oval) head wood screw | DIN 7995 |
| Cross recessed round head wood screw | DIN 7996 |
| Cross recessed raised countersunk (flat) head wood screw | DIN 7997 |
| Self Drilling screw for fiber cement board | DIN 18182 |
Rivets | |
| Plain rivet | DIN 660, PN 82952, GOST 10299-80 |
| Countersunk head rivet | DIN 661, PN 82954, GOST 10300-80 |
| Blind rivet flat head | DIN EN ISO 15977, GOST 15973-2005 |
| Blind rivet countersunk | DIN EN ISO 15978, GOST 15974-2005 |
| Tubular rivet flat head | DIN 7340, PN 82972, GOST 12639-80 |
| Steel round head rivets | DIN 124 |
| Tubular rivet round head | DIN 7340, PN 82973, GOST 12638-80 |
Shafting Collars | |
| External Retaining Ring | DIN 471, PN 85111 |
| Internal Retaining Ring | DIN 472, PN 85111 |
| Circlip For Shafts | DIN 6799, PN 85112 |
| Adjusting rings with set screw | DIN 705, PN 85101 |
| Mushroom head rivet | PN 82957, GOST 10301-80 |
| Flat round head rivet | PN 82958, GOST 10302-80 |
Pins | |
| Parallel pin | ISO 2338, EN ISO 2338, DIN EN ISO 2338, PN EN ISO 2338, GOST 3128-70, JIS B 1354 B |
| Parallel pins, of hardened steel | ISO 8734, PN EN 22339, JIS B 1355 B |
| Taper pin | ISO 2339, EN 22339, DIN EN 22339, PN-84/M-85028, GOST 3129-70 |
| Parallel pin with internal thread | ISO 8733, EN ISO 8733, DIN EN ISO 8733, PN-84/M-85028, JIS B 1359-1 |
| Taper pin with internal thread, ground | ISO 8736, EN 28736, DIN EN 28736, PN EN ISO 8733, GOST 9464-79, JIS B 1358 |
| Grooved pin - Half-length centre grooved | ISO 8743, EN ISO 8743, DIN EN ISO 8743, PN EN 28736, GOST 8743-93 |
| Grooved pin - Full-length taper grooved | ISO 8744, EN ISO 8744, DIN EN ISO 8744, PN EN ISO 8743, GOST 10773-93 |
| Grooved pin - Half-length taper grooved | ISO 8745, EN ISO 8745, DIN EN ISO 8745, PN EN ISO 8744, GOST 8745-93 |
| Grooved pin - Half-length reverse-taper grooved | ISO 8741, EN ISO 8741, DIN EN ISO 8741, PN EN ISO 8745, GOST 8741-93 |
| Grooved pin - One-third-length centre grooved | ISO 8742, EN ISO 8742, DIN EN ISO 8742, PN EN ISO 8741, GOST 8742-93 |
| Grooved pin - Full-length parallel grooved, with pilot | ISO 8739, EN ISO 8739, DIN EN ISO 8739, PN EN ISO 8742, GOST 12850.1-93 |
| Grooved pin - Full-length parallel grooved, with chamfer | ISO 8740, EN ISO 8740, DIN EN ISO 8740, PN EN ISO 8739, GOST 12850.2-93 |
| Spring-type straight pin -- Slotted, heavy duty | ISO 8752, EN ISO 8752, DIN EN ISO 8752, PN EN ISO 8740, GOST 14229-93, JIS B 2808 |
| Spring-type straight pins | ISO 13337, PN EN ISO 8752, JIS B 2808 |
| Spring-type straight pin -- Coiled, standard duty | ISO 8750, EN ISO 8750, DIN EN ISO 8750, PN EN ISO 8750, JIS B 2808 |
| Parallel pin with internal thread | ISO 8735, EN ISO 8735, DIN EN ISO 8735 |
| Grooved pin with round head | ISO 8746, EN ISO 8746, DIN EN ISO 8746 |
| Cylindrical to unravel | DIN 7341, GOST 10774-80 |
Parallel keys | |
| Parallel key with round ends (both ends) (low) | ISO 2491, PN-M-85002, GOST 29175-91 |
| Parallel key with chamfer (low) | ISO 2491, PN-M-85002, GOST 29175-91 |
| Parallel key with round end (one end) (low) | ISO 2491, PN-M-85002, GOST 29175-91 |
| Keyway on shaft | ISO 2491, DIN 6885, PN-M-85005, GOST 23360 |
| Parallel key with round end | DIN 6885, PN-M-85005, GOST 23360 |
| Parallel key with chamfer | DIN 6885, PN-M-85005, GOST 23360 |
| Parallel key with half-length centre hole | DIN 6885, PN-M-85005 |
| Parallel key with chamfer, half-length centre hole | DIN 6885, PN-M-85005 |
| Parallel key with round end, double holes (friction-fit) | DIN 6885, PN-M-85005 |
| Parallel key with chamfer double holes (friction-fit) | DIN 6885, PN-M-85005 |
| Parallel key with round end, half-length centre hole (low) | DIN 6885 |
| Woodruff key | DIN 6888 |
| Parallel key with round end, double holes | PN-M-85005 |
| Parallel key with chamfer, double holes | PN-M-85005 |
| Parallel key with round end (one end) | PN-M-85005, GOST 23360 |
| Parallel key with round end (friction-fit) | PN-M-85005 |
| Parallel key with round end (both ends) (high) | PN-M-85001, GOST 10748-79 |
| Parallel key with chamfer (high) | PN-M-85001, GOST 10748-79 |
| Parallel key with round end (one end) (high) | PN-M-85001 |
Keys | |
| Round ends Taper Key (both ends) | ISO R 773, DIN 6886, PN-M-85031, GOST 24068-80 |
| Taper key with chamfer | ISO R 773, DIN 6886, PN-M-85031, GOST 24068-80 |
| Round end Taper Key (one end) | ISO R 773, PN-M-85031, GOST 24068-80 |
| Taper key with gib head | ISO R 774, DIN 6887, PN-M-85031, GOST 24068-80 |
| Round ends flat key (both ends) | ISO 2492, PN 85035, GOST P 50536-93 |
| Flat key with chamfer | ISO 2492, DIN 6883, PN 85034, GOST P 50536-93 |
| Round end plain key (one end) | ISO 2492, PN 85035, GOST P 50536-93 |
| Plain key with gib head | ISO 2492, PN 85034, GOST P 50536-93 |
| Gib-head saddle key | DIN 6889, PN 85036 |
| Concave, rounded wedge | PN 85037 |
| Concave cut wedge | PN 85036 |
| Concave wedge rounded on one side | PN 85037 |
Centering hole | |
| Centering hole type A | ISO 6411, DIN 332, PN-M-02499, GOST 14034 |
| Centering hole type B | ISO 6411, DIN 332, PN-M-02499, GOST 14034 |
| Centering hole type R | ISO 6411, DIN 332, PN-M-02499, GOST 14034 |
| Centering hole type C | DIN 332, GOST 14034 |
| Centering hole type D | DIN 332 |
| Centering hole type E | GOST 14034 |
| Centering hole type F | GOST 14034 |
| Centering hole type T | GOST 14034 |
Sealing rings | |
| Sealing rings | DIN 7603, PN-M-73060 A |
| O-rings | ISO 3601-1, DIN 3771, PN-M-73060 G, GOST 9833, JIS B 2401-1 |
| Radial Oil Seal type 1 | ISO 6194-1, DIN 3760 A, PN-M-73067, GOST 8752-1, JIS B 2402-1 |
| Radial Oil Seal type 4 | ISO 6194-4, DIN 3760 AS, PN-M-73067, GOST 8752-2, JIS B 2402-4 |
Plain shaft bearings | |
| Flanged bushing | ISO 4379, DIN ISO 4379, PN-M-87250 B |
| Cylindrical bushing | ISO 4379, DIN ISO 4379, PN-M-87250 A |
| Flanged bushing | ISO 2795, DIN 1850 V, PN-93/M-61251 |
| Cylindrical bushing | ISO 2795, DIN 1850 J, PN-93/M-61251 |
| Flanged bushing | ISO 4247 |
| Cylindrical bushing | ISO 4247 |
| Flanged bushing type A | DIN 172 |
| Flanged bushing type B | DIN 172 |
| Cylindrical bushing type A | DIN 179 |
| Cylindrical bushing type B | DIN 179 |
Nuts groove bearings | |
| Rolling bearings - Locknuts | ISO 2982-2, DIN 981, GOST 8530 |
| Slotted Round Nut | DIN 1804, PN-M-82471 |
Rolling bearings | |
| Needle roller thrust bearing with trough inner ring, caged | ISO 3245, PN-M-86295-1, GOST 4060-78 |
| Needle roller thrust bearing with blind inner ring, caged | ISO 3245, DIN 618, PN-M-86295-3, GOST 4060-78 |
| Needle roller thrust bearing with trough inner ring, without cage | ISO 3245, DIN 618, PN-M-86295-2, GOST 4060-78 |
| Needle roller thrust bearing with blind inner ring, without cage | ISO 3245, PN-M-86295-4, GOST 4060-78 |
| Tapered roller bearing - metric | ISO 355, DIN-ISO 355, PN-ISO 355, GOST 27365-87 |
| Single row deep groove ball bearing | DIN 625, PN-M-86100-1, GOST 8338-75 |
| Ball bearing with one shield | DIN 625, PN-M-86100-2, GOST 7242-81 |
| Ball bearing with two shields | DIN 625, PN-M-86100-3, GOST 7242-81 |
| Ball bearing with one rubber seal | DIN 625, PN-M-86100-4, GOST 8882-75 |
| Ball bearing with two rubber seals | DIN 625, PN-M-86100-5, GOST 8882-75 |
| Ball Bearing with snap ring groove on outer ring | DIN 625 |
| Thrust ball bearing with snap ring groove on outer ring | DIN 711, PN-M-86261-1, GOST 7872-89 |
| Thrust ball bearing with snap ring groove on outer ring and washer | DIN 711, PN-M-86261-2, GOST 7872-89 |
| Angular contact ball bearing - Single-direction - 72 i 73 catalogue | DIN 628, PN-M-86160-1, GOST 831-75 |
| Angular contact ball bearing - Dual directions - QJ19, QJ10, QJ2 and QJ3 catalogue | DIN 628, PN-M-86160-2, GOST 8995-75 |
| Angular contact ball bearing - Dual directions | DIN 628, PN-M-86160-6 |
| Self-aligning ball bearing | DIN 630, PN-M-86130-1, GOST 28428-90 |
| Self-aligning ball bearing with tapered bore | DIN 630, PN-M-86130-2, GOST 28428-90 |
| Single row thrust cylindrical bearing | DIN 722, PN-M-86420-1, GOST 23526-79 |
| Double row full complement cylindrical roller bearing NNU49 design | DIN 5412, PN-M-86208-1, GOST 7634-75 |
| Double row full complement cylindrical roller bearing NNU49K design | DIN 5412, PN-M-86208-2, GOST 7634-75 |
| Double row full complement cylindrical roller bearing NN30 design | DIN 5412, PN-M-86208-3, GOST 7634-75 |
| Double row full complement cylindrical roller bearing NN30K design | DIN 5412, PN-M-86208-4, GOST 7634-75 |
| Double row tapered roller bearing | DIN 635, PN-M-86240-1, GOST 5721-75 |
| Double row tapered roller bearing with tapered bore | DIN 635, PN-M-86240-2, GOST 5721-75 |
| Double row tapered roller bearing with tapered bore with pull inner ring | DIN 635, PN-M-86240-3, GOST 5721-75 |
| Ball bearing with tapered bore | PN-M-86100-8 |
| Angular contact ball bearing - Single-direction - catalogue | PN-M-86160-3, GOST 831-75 |
| Angular contact ball bearing - Dual directions - catalogue | PN-M-86160-4, GOST 8995-75 |
| Angular contact ball bearing - Dual directions - QJ19, QJ10, QJ2 and QJ3 catalogue | PN-M-86160-5 |
| Single row cylindrical roller bearing | PN-M-86180-1, GOST 8328-75 |
| Single row cylindrical roller bearing NJ design | PN-M-86180-2, GOST 8328-75 |
| Single row cylindrical roller bearing N design | PN-M-86180-3, GOST 8328-75 |
| Single row cylindrical roller bearing NUP design | PN-M-86180-6, GOST 8328-75 |
| Cylindrical roller bearing without inner ring RN design | PN-M-86180-7 |
| Double row thrust cylindrical bearing | PN-M-86420-2, GOST 23526-79 |
| Multi-row cylindrical roller bearing, caged | PN-M-86208-5 |
| Multi-row cylindrical roller bearing, without cage | PN-M-86208-6, GOST 7634-75 |
Clevis pins | |
| Clevis pin with head and (with or without split pin hole) | ISO 2341, EN 22341, DIN-EN 22341, PN-EN 22341, GOST 9650 |
| Clevis pin without head (with or without split pin hole) | ISO 2340, EN 22340, DIN-EN 22340, PN-EN 22340, GOST 9650 |
Split pin | |
| Split pin | ISO 1234, EN ISO 1234, DIN-EN ISO 1234, PN-EN ISO 1234, GOST 397, JIS B 1351 |
Screw plugs | |
| Hex head screw plug type B | DIN 908, PN-M-73124 |
| Hex head screw plug type A | PN-M-73124 |
Lubricators | |
| Lubricating nipple, cone type - tapered thread | DIN 71412, PN 86002, GOST 19853 |
| Lubricating nipple, cone type - cylindrical thread | DIN 71412, PN 86002 |
| Angle Lubricating nipple, cone type - tapered thread | DIN 71412, PN 86003, GOST 19853 |
| Angle Lubricating nipple, cone type - cylindrical thread | DIN 71412, PN 86003 |
Fasteners -- Ends of parts with external ISO metric thread | |
| Chamfered end (CH) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| As-rolled end (RL) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Rounded end (RN) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Flat point (FL) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Short dog point (SD) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Long dog point (LD) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Cone point (CN) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Truncated cone point (TC) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Cup point (CP) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
Springs | |
| Compression spring | |
| Disc spring | |
Screw Connection | |
| Connection (Hexagon head bolt and nut) | |
| Connection (Countersink + Hexagon socket head cap screw and nut) | |
| Connection (Hexagon socket head cap screw + nut) | |
Steel Shapes | |
| Flat steel bar (Hot rolled) | ISO 1035-3, DIN-EN 10058:2004U, EN 10058:2004U, PN-EN 10058:2004U, GOST 103-2006 |
Steel Shapes | |
| L-shape equal angles | ISO 657-1, ASTM A6/A6M, DIN-EN 10056-1:2000, EN 10056-1:2000, PN-EN 10056-1:2000, GOST 8509-93, IS 808, JIS G 3192 |
| L-shape unequal angles | ISO 657-2, ASTM A6/A6M, DIN-EN 10056-1:2000, EN 10056-1:2000, PN-73/H-93460.01, GOST 8510-86, IS 808, JIS G 3192 |
| L-shape unequal angles | PN-EN 10056-1:2000, GOST 19772-93, JIS G 3192-1 |
| L-shape unequal angles | JIS G 3192-2 |
| L-shape equal angles | GOST 19771-93 |
Steel Shapes | |
| C-shape (hot rolled) | ASTM A6/A6M |
| U-shape (economic) | DIN 1026-2:2002-10, PN-71/H-93451, GOST 8240-97, IS 808 |
| U-shape (rolled) | ISO 657-11, DIN 1026-1:2000-3 , PN-86/H-93403, GOST 8278-83, JIS G 3192 |
| U-shape (hot rolled) | PN-H-93400:2003, GOST 8240-97, IS 808 |
| U-shape (yield strength over 490 MPa) | PN-73/H-93460.04 |
Steel Shapes | |
| T-shape (hot rolled) | ISO 657-21, DIN-EN 10055:1999, EN 10055:1999, PN-EN 10055:1999, JIS G 3192 |
Steel Shapes | |
| Z-shape | DIN 1027:2004-04 JIS G 3350B |
| Z-shape (yield strength over 490 MPa) | PN-73/H-93460.08 |
| Z-shape (yield strength up to 490 MPa) | PN-73/H-93460.07 |
Steel Shapes | |
| I-shape (Hot rolled) | ISO 657-15, GOST 8239-89, JIS G 3192 I |
| I-shape (Hot rolled) | DIN 1025-1 |
| Hot rolled I-beams - Part 5 IPE-serie | DIN 1025-5 |
| Hot rolled I-beams - Part 2 HEB-serie | DIN 1025-2 |
| Hot rolled I-beams - Part 3 HEA-serie | DIN 1025-3 |
| Hot rolled I-beams - Part 4 HEM-serie | DIN 1025-4 |
| H-shape (Hot-rolled parallel-flange steel IPE - Dimensions) | PN-H-93419 |
| H-shape (Hot rolled wide-flange steel beams - Dimensions) | DIN 1025, PN-H-93452, GOST 26020-83, IS 808, JIS G 3192 H |
| I-shape ASTM | IS 808 |
| W-shape ASTM | ASTM A6/A6M |
| M-shape ASTM | ASTM A6/A6M |
| S-shape ASTM | ASTM A6/A6M |
| HP-shape | ASTM A6/A6M |
| Steel I-beams and special steel channels | GOST 19425-74 |
Steel Shapes | |
| Welded round structural tubing (Cold formed welded structural hollow sections) | ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 10704-91 |
| Welded square structural tubing (Cold formed welded structural hollow sections) | ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 30245-2003 |
| Welded rectangular structural tubing (Cold formed welded structural hollow sections) | ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 30245-2003 |
| Seamless cold drawn tubes | DIN-EN 10305-1:2011, EN 10305-1:2011, PN-EN 10305-1:2011, GOST 8734-75 |
| Welded cold drawn tubes | DIN-EN 10305-2:2011, EN 10305-2:2011, PN-EN 10305-2:2011, GOST 10707-80 |
| Welded cold sized tubes | DIN-EN 10305-3:2011, EN 10305-3:2011, PN-EN 10305-3:2011, GOST 9567-75 |
| Seamless cold drawn tubes for hydraulic and pneumatic power systems | DIN-EN 10305-4:2011, EN 10305-4:2011, PN-EN 10305-4:2011 |
| Welded square structural tubing (For precision applications) | DIN-EN 10305-5:2011, EN 10305-5:2011, PN-EN 10305-5:2011, GOST 8639-82, JIS G-3466 |
| Welded rectangular structural tubing (For precision applications) | DIN-EN 10305-5:2011, EN 10305-5:2011, PN-EN 10305-5:2011, GOST 8645-68, JIS G-3466 |
Steel Tubes | |
| Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | ASTM A500 |
Steel Shapes | |
| Welded square structural tubing | ISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-1:2006 |
| Welded round structural tubing | ISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-2:2006 |
| Welded rectangular structural tubing | ISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-5:2006 |
Steel Bars | |
| Round stainless steel bar (Hot rolled) | ISO 1035-1, DIN-EN 10060:2006P, EN 10060:2006P, PN-EN 10060:2004U, GOST 2590-2006 |
| Square steel bar (Hot rolled) | ISO 1035-2, ANSI AISC, DIN-EN 10059:2005P, EN 10059:2006P, PN-EN 10059:2004U, GOST 2591-2006 |
| Hexagon steel bar (Hot rolled) | DIN-EN 10061:2006P, EN 10061:2006P, PN-EN 10061:2004U, GOST 8560-88 |
Steel Rods | |
| Round steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191A |
| Square steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191B |
| Rectangular steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3194 |
| Hexagon steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191C |
Steel Tubes | |
| Seamless steel tube for pressure purposes | DIN-EN 10216:2004, EN 10216:2004, PN-EN 10216:2004 |
| Non-alloy steel tube for liquid purposes (including water) | DIN-EN 10224:2006, EN 10224:2006, PN-EN 10224:2006 |
| Non-alloy steel tubes suitable for welding and threading | DIN-EN 10255:2004 |
| Seamless and welded steel tubes | DIN-EN 10220:2003 |
| Carbon steel tube suitable for screwing | PN-H-74200:1998 |
| General-purpose seamless steel tube | PN-H-74220:1984 |
| Electrically welded steel tubes | GOST 10704-91 |
| Water supply steel pipes | GOST 3262-75 |
| Seamless steel tubes | GOST 550-75 |
| Seamless hot deformed steel pipes | GOST 8732-78 |
| Seamless steel tubes cold deformed | GOST 8734-75 |
| Seamless hot deformed steel pipes | GOST 9940-81 |
| Seamless cold deformed tubes | GOST 9941-81 |
Aluminium Shapes | |
| L-shape | DIN-EN 573, EN 573, PN-EN 573, GOST 13618-97 |
Aluminium Shapes | |
| U-shape | DIN-EN 573, EN 573, PN-EN 573 |
Aluminium Shapes | |
| T-shape | DIN-EN 573, EN 573, PN-EN 573, GOST 13622-91 |
Aluminium Shapes | |
| I-shape | DIN 1025-5, GOST 13621-90 |
Aluminium Shapes | |
| Z-shape | GOST R 50067-92 |
| Z-shape | GOST 13620-90 |
Aluminium profiles | |
| Profil 45 x 45 | |
Flanges | |
| Welding neck flanges ANSI 150lb/sq.in. Up to 12'' | ANSI 150lb/sq.in. |
| Welding neck flanges ANSI 150lb/sq.in. Over 12'' | ANSI 150lb/sq.in. |
| Welding neck flanges ANSI 300lb/sq.in. Up to 12'' | ANSI 300lb/sq.in. |
| Welding neck flanges ANSI 300lb/sq.in. Over 12'' | ANSI 300lb/sq.in. |
| Welding neck flanges | DIN 2632 |
| Welding neck flanges | DIN 2633 |
| Welding neck flanges | DIN 2634 |
| Welding neck flanges | DIN 2635 |
| Welding neck flanges | DIN 2636 |
| Blind flange Form B | DIN 2527 Form B, ISO 7005-1 |
| Blind flange Form T | DIN 2527 Form T |
| Blind flange Form E | DIN 2527 Form E |
| Flat flange for welding Form A | DIN 2573 Form A, ISO 7005-1 |
| Flat flange for welding Form B | DIN 2573 Form B |
| Flat flange for welding Form AS | DIN 2573 Form AS |
| Flat flange for welding Form BS | DIN 2573 Form BS |
| Flat flange for welding Form A | DIN 2576 Form A |
| Flat flange for welding Form B | DIN 2576 Form B |
| Flat flange for welding Form AS | |
| Flat flange for welding Form BS | DIN 2576 Form BS |
| Lapped flanges Plain collars | DIN 2641 |
| Lapped flanges Plain collars | DIN 2642 |
| Welding Flanges for Pressure Vessels Forms A | DIN 28031 |
| Welding Flanges for Pressure Vessels Forms B | DIN 28031 |
| Welding Flanges for Pressure Vessels Forms D | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms F | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms N | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms V | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms R | DIN 28032 |
| Welding Flanges for Pressure Vessels | DIN 28036 |
| Welding neck flanges | DIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1, GOST 12821-80 |
| Flat flange | DIN-EN 1092-1, EN 1092-1:2001, ISO 7005-1, PN-EN 1092-1 |
| Blind flange | DIN-EN 1092-1, EN 1092-1, PN-EN 1092-1 |
| Loose plate flanges with weld-on plate collar | DIN-EN 1092-1, EN 1092-1, PN-EN 1092-1 |
| Loose plate flanges with weld-neck collar | DIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1 |
| Hubbed slip-on flanges | DIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1 |
| Hubbed threaded flanges | DIN-EN 1092-1, EN 1092-1, PN-EN 1092-1 |
| Oval flanges | DIN 2561 |
| Hubbed Socket Welding Flange | ISO 7005-1 |
| Loose Plate Flange with Weld-On Plate Collar | ISO 7005-1 |
Flanges\Grey iron flanges | |
| Blind flange Type A | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Blind flange Type B | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Hubbed threaded flanges | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Integral flange | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
Flanges\Ductile iron flanges | |
| Welding neck flanges | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Blind flange Type A | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Blind flange Type B | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Loose plate flanges with weld-neck collar | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Hubbed slip-on flanges | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Hubbed threaded flanges | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Integral flange | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
Flanges\Malleable iron flanges | |
| Blind flange Type A | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Blind flange Type B | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Hubbed threaded flanges | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Integral flange | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
Fittings | |
| Elbow 45° | ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83 |
| Elbow 90° | ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83 |
| Elbow 180° | ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83 |
| Reducing elbow 90° | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Tee | ANSI B 16.9 2007, ASME B 16.9 2007, GOST 17376-2001 |
| Reducing Tee | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Reducing Crosse | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Eccentric reducer with reduced pressure factor | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Tee DIN 2615 style A | DIN 2615 |
| Tee DIN 2615 style B | DIN 2615 |
| Eccentric reducer with reduced pressure factor | DIN 2616-1 |
| Eccentric reducer with reduced pressure factor | DIN 2616-2 |
| Branch saddles | DIN 2618 |
| Asymmetrical reducer | GOST 17378-2001 |
| Symmetrical reducer | GOST 17378-2001 |
Steel pipes | |
| Stainless steel pipe | ASME B36.19M-2004, DIN 10297-1 |
| Welded and seamless wrought steel pipe | ASME B36.10M-2004 |
| Steel pipe suitable for screwing | DIN 2440 |
| Seamless steel tubes | DIN 2448 GOST 550-75 |
| Seamless steel tubes hydraulic | DIN 2445 |
| Welded steel tubes | DIN 2458 |
| Stainless steel pipe | DIN 2462, ISO 1127 |
| Non-alloy steel tubes suitable for welding and threading | DIN-EN 10255:2004, EN 10255:2004, PN-EN 10255:2004 |
| Non-alloy steel pipe | EN 10224:2006, PN 10224:2006 |
| Seamless steel pipe for pressure purposes | EN 10216:2004, PN 10216:2004 |
| Seamless and welded steel tubes | ISO 4200 |
| Seamless and Welded Austenitic Stainless Steel Pipes | ASTM A312/A312M-09 |
| Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | ASTM A53/A53M-07 |
| Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures | ASTM A524-96 |
| Stainless Steel Welded Round Tube | ASTM A269 |
| Stainless steel pipe, with thread | PN-H-74200:1998 |
| General-purpose seamless steel tube | PN-H-74220:1994 |
| Seamless steel tube for pressure purposes | GOST 11017-80 |
| Electrically welded steel tubes | GOST 10704-91 |
| Precision steel tubes | GOST 9567-75 |
| Seamless hot deformed steel pipes | GOST 9940-81 |
| Seamless cold deformed tubes | GOST 9941-81 |
Dished ends | |
| Torospherical dished ends | DIN 28011 |
| Torospherical dished ends | DIN 28013 |
| Steel butt-welding pipe fittings | DIN 2617 |
Heat exchangers | |
| Heat exchanger DIN 28184-1 - 2 beams | DIN 28184-1 |
| Heat exchanger DIN 28184-2 - 2 beams | DIN 28184-2 |
Drives and control: | ISO 1219-1 |
| Hydraulic Source of Energy Direction | |
| Path of fluid through valve | |
| Rotary motion | |
| Variability pump, motor etc. | |
| Electric | |
| Closed path or port | |
| Opposing Linear Actuators Limited Angle of Motion | |
| Temperature Indication or control | |
| Prime mover | |
| Spring | |
| Restrictor | |
| Place for including Non-Return valve symbol | |
| Junctions | |
| Flexible | |
| Piston rod | |
| Shaft | |
| Shaft -two ways rotate | |
| Detent positioning limited angle of motion | |
| Locking device or control | |
| Over centre device to prevent stopping on dead centre | |
| Non-specific control | |
| Push button control | |
| Pull button control | |
| Push-Pull button control | |
| Lever control | |
| Pedal control | |
| Treadle control | |
| Plunger control | |
| Plunger control with adjustable lenght | |
| Two way function spring | |
| Two way roller control | |
| Roller control | |
| Solenoid controller 1-winding | |
| Solenoid controller 2-winding | |
| Solenoid controller 2-winding assembly | |
| Electric motor | |
| Piezoelectric component | |
| Pressure controller | |
| Operate valve by differential pressure area | |
| Internal pilot path | |
| External pilot path | |
| Hydraulic pilot (Direct) (steering by application of pressure) | |
| Hydraulic pilot (Direct) (steering by release hydraulic pressure) | |
| Oil Pressure Controller (via Control) (steering by application of pressure) | |
| Oil Pressure Controller (via control) (steering by release hydraulic pressure) | |
| Oil Pressure-indirectly Controller (via Control) (steering by application of pressure) | |
| Oil Pressure-indirectly Controller (via Control) (steering by release hydraulic pressure) | |
| 2-Stage hydraulic pilot | |
| Solenoid Operated pilot Valve-Exhaust pilot stage | |
| Solenoid Operated pilot Valve | |
| Pneumatic and Pilot Stage - Pilot Drain | |
| Solenoid Control Hydraulic Pilot Spring Cantered External Pilot Supply Drain | |
| External feedback | |
| Internal feedback | |
| Hydraulic motor | |
| Fixed capacity with one direction of flow - pump | |
| Hydromotor | |
| Fixed Capacity Bi-Directional Output motor - pump | |
| Hydropumpe/-motor | |
| Variable Capacity (with Undefined Control Mechanism One Direction of Flow) - pump/motor | |
| Fixed Capacity Unit-Directional Output | |
| Variable Capacity (with Hand Control Mechanism Two Directions of Flow) - pump/motor | |
| Hydraulic variable speed drive unit | |
| Pressure-compensated variable pump | |
| Variable pump motor | |
| Single-acting retraction cylinder | |
| Double-acting hydraulic cylinder | |
| Double-acting telescopic hydraulic cylinder | |
| Pneumatic- hydraulic actuator | |
| Pneumatic- hydraulic, continuous operations | |
| Pressure intensifier | |
| Pressure intensifier, continuous operations | |
| Accumulator | |
| Accumulator-Fluid Maintained Under Pressure by Inert Gas | |
| Prime mover, Non-electric | |
| Transient position | |
| Position opposite, extreme positions | |
| Extreme position opposite, middle (neutral) | |
| Directional control valve — with manual control | |
| Directional control valve 2/2, — with lever control | |
| Directional control valve 2/2, — with lever control, with return spring | |
| Directional control valve 3/2, - with roller control, with return spring | |
| Directional control valve 4/2, - with button control, with return spring | |
| Directional control valve 3/3, - with solenoid control, spring centred | |
| Directional control valve 4/3, - with button control, spring centred | |
| Directional control valve 5/3, - 2 stage solenoid and increase pressure, spring centred | |
| Directional control valve 2/2, - with support valve pre-control | |
| Directional control valve 3/2, - with solenoid control, with return spring | |
| Directional control valve 5/2, - with pressure control | |
| Directional control valve 4/3, pre-control | |
| Directional continuous control valve (open), middle (neutral) position | |
| Servo-valve | |
| Shuttle-off valve — free | |
| Shuttle-off valve — free (Simplified symbol) | |
| Shuttle-off valve — spring loaded | |
| Shuttle-off valve — spring loaded (Simplified symbol) | |
| Shuttle-off valve — pilot controlled | |
| Shuttle-off valve — pilot controlled (Simplified symbol) | |
| Shuttle-off valve — pilot controlled, spring loaded | |
| Shuttle-off valve — pilot controlled, spring loaded (Simplified symbol) | |
| Shuttle valve | |
| Shuttle valve (Simplified symbol) | |
| Priority shuttle valve | |
| Priority shuttle valve (Simplified symbol) | |
| Rapid exhaust valve | |
| Rapid exhaust valve (Simplified symbol) | |
| Pressure relief valve, single-stage (Simplified symbol) | |
| Pressure relief valve, two-stage | |
| Pressure sequence valve | |
| Pressure relief valve, electrically operated | |
| Reducing valve - pressure regulator, single-stage | |
| Reducing valve - pressure regulator, two-stage | |
| Reducing exhaust valve | |
| Throttle valve, with manual control | |
| Throttle valve | |
| Gate valve | |
| Adjustable restrictor valve, — with mechanical control against a return spring | |
| One way restrictor valve | |
| Series flow control valve | |
| Series flow control valve (Simplified symbol) | |
| Compensated flow control valve | |
| Compensated flow control valve (Simplified symbol) | |
| Flow control valve — with fixed output and relief port to reservoir | |
| Flow control valve — with fixed output and relief port to reservoir (Simplified symbol) | |
| Vented reservoir open to atmosphere | |
| Vented reservoir with inlet pipe above fluid level | |
| Vented reservoir — with inlet pipe below fluid level | |
| Pressurized reservoir | |
| Filter or strainer | |
| Eingießfilter | |
| Ansaugfilter | |
| Air Filter | |
| Pressure indicator | |
| Pressure gauge | |
| Differential pressure gauge | |
| Liquid level gauge | |
| Thermometr | |
| Flow indicator | |
| Flow meter | |
| Integrating flow meter | |
| Tachometer | |
| Torque meter | |
| Pressure switch | |
| Limit switch | |
| Analog transducer | |
| Pneumatic Source of Energy -direction | |
| Air bleed | |
| Air bleeds (momentary) | |
| Air bleed - adjustable (momentary) | |
| Air exhausts port — plain with no provision for connection | |
| Air exhaust port — threaded for connection | |
| Self-sealing coupling (— connected, without mechanically opened non-return valve) | |
| Self-sealing coupling (— unconnected, without mechanically opened non-return valve) | |
| Self-sealing coupling (— connected, with mechanically opened non-return valves) | |
| Self-sealing coupling (— unconnected, with mechanically opened non-return valves) | |
| Angular/Rotary connection — one way | |
| Angular/Rotary connection — three ways | |
| Pneumatic pilot (Direct) (steering by application of pressure) | |
| Pneumatic pilot (Direct) (steering by release pneumatic pressure) | |
| Pneumatic pilot (Directional valve) (steering by application of pressure) | |
| Pneumatic pilot (Directional valve) (steering by release pneumatic pressure) | |
| Pneumatic Pressure-indirectly controller (via Control) (steering by application of pressure) | |
| Pneumatic Pressure-indirectly controller (via Control) (steering by release hydraulic pressure) | |
| Combined control — by solenoid and pilot Valve-Exhaust pilot stage | |
| Combined control — by solenoid and pilot directional valve | |
| 2-Stage Hydraulic and Pneumatic Pilot drain | |
| Pneumatic motor | |
| Pneumatic motor - variable capacity | |
| Pneumatic motor - fixed capacity, — with two directions of flow | |
| Pneumatic motor - variable capacity, — with two directions of flow | |
| Air compressor | |
| Pneumatic semi-rotary actuator (Oscillating motor) | |
| Single-acting pneumatic extension cylinder | |
| Single-acting pneumatic retraction cylinder | |
| Double-acting pneumatic cylinder | |
| Double acting-Fixed cushion at full area side only - cylinder | |
| Double acting-Adjustable Cushioning at both ends - cylinder | |
| Single acting Telescopic - cylinder | |
| Double acting-Double Piston Rod - cylinder | |
| Rodless cylinder | |
| Pneumatic impact cylinder | |
| Tandem cylinder | |
| Four Acting-Double Piston Rod -built in position controller | |
| Double Acting-Double Piston Rod -built in position controller | |
| Rodless cylinder adjustable cushioning, magnetic | |
| Cable cylinder | |
| Double acting piston Rod with pneumatic brake | |
| Air spring actuator | |
| Pneumatic- hydraulic acturator | |
| Reserve air receiver | |
| Air receiver | |
| Prime mover, Non-eletric | |
| Extreme position opposite, middle ( neutral) | |
| Directional control valve 5/3, - 2 stage solenoid, increase pressure, spring centred | |
| Directional control valve 3/2, - controlled by solenoid with return spring | |
| Directional control valve 5/2 — controlled by pressure in both directions | |
| Directional continuous control valve (close), middle (neutral) position | |
| Pressure regulator | |
| Pressure reducing valve | |
| Adjustable restrictor valve, — with mechanical control against a return spring (Simplified symbol) | |
| Shut-off valve | |
| Throttle valve — with mechanical control against a return spring (braking valve) | |
| Flow divider valve | |
| Filter with additional magnetic element | |
| Filter with contamination indicator | |
| Filter with manual drain | |
| Filter with separator, automatic drain | |
| Filter with separator, manual drain | |
| Air dryer | |
| Lubricator | |
| Conditioning unit | |
| Conditioning unit (Simplified symbol) | |
| Cooler — without representation of the flow lines of the coolant | |
| Cooler — indicating the flow lines of the coolant | |
| Heater (arrows in the diamond indicate the introduction of heat) | |
| Temperature controller | |
| Pulse counter with electric output signal | |
| Pulse counter with pneumatic output signal | |
| Volumenstromanzeige | |
| Druckschalter | |
| Silencer | |
| Symbols control methods - one way acting | |
| Controlling valves with three or more positions | |
| Symbols of control mechanisms with three positions | |
| Controlling by pressure in middle (neutral) position | |
| Elements indirectly controlled | |
| Combined control - by 2 independent control (push-poll button solenoid) | |
| Combined control - by 2 dependent control (solenoid pilot directional valve) | |
| Rasten werden in der gleichen Anzahl | |
| Safety mechanism, protection against overloading technological flow | |
| Safety mechanism, protection against overloading return technological flow | |
| Safety mechanism, protection against overloading every technological flow | |
| Safety mechanism, protection against overloading 2 directions technological flows | |
| Safety mechanism, protection against overloading return stagnancy technological flows | |
| Safety mechanism, protection against overloading return stagnancy-return technological flows | |
| Safety mechanism, protection against overloading technological and stagnancy | |
| Stop in technological flow possible return flow | |
| Stop in return flow possible technological flow | |
| Stop in all flows | |
| Adjustable in technological flow | |
| Adjustable in return flow | |
| Adjustable in all flow | |
| Upholding after technological flow | |
| Upholding after return flow | |
| Upholding after any flow | |
| Setting less accurate technological flow | |
| Setting less accurate return flow | |
| Setting less accurate all flows | |
| Setting accurate and stabilizes technological flow | |
| Setting accurate and stabilizes return flow | |
| Setting accurate and stabilizes all flows | |
| Protection in technological flow | |
| Protection in return flow | |
| Protection in all flow | |
| Blockade after technological flow | |
| Blockade after return flow | |
| Blockade after any flow | |
| Mechanical control of servomotor | |
| Electrical control of servomotor | |
| Dividers proportionate | |
| Flow Dividers - one stage | |
| Flow Dividers - two stages | |
| Individual station for one performance at the same pressure safety | |
| Individual station for one performance at two pressure safety | |
| Individual station with two capacities at the same pressure safety | |
| Individual station with two capacities at two safety pressures | |
| Engine, fixed capacity, — with one direction of flow | |
| Element, fixed capacity, — with two directions of flow | |
| Pomp, variable capacity, — with one direction of flow | |
| Engine, variable capacity, — with one direction of flow | |
| Element, variable capacity, — with one direction of flow | |
| Element, variable capacity, — with two directions of flow | |
| Engine with two directions of flow, - with smooth change of capacity | |
Logical fluid circuits, binary logic symbols: | ISO 5784-1 |
| Logical Element | |
| Symbol qualifier functions AND/OR figures | |
| Connecting symbols | |
| Direction of the flow of information | |
| Deployment of INPUT and OUTPUT | |
| NOT | |
| Entry negation | |
| Entry blocking | |
| Entry blocking - negation | |
| Entry static | |
| Entry dynamic, for which the dynamic state of 1 means the transition from 0 to 1 | |
| Entry dynamic, for which the dynamic state of 1 means the transition from 1 to 0 | |
| ''YES'' | |
| ''NOT'' | |
| ''AND'' | |
| ''OR'' | |
| Elements of processing power | |
| Gauge | |
| Shuttle-off valve, connection, and roll | |
| Engine or a pump with a limited rotate angle | |
| Control element | |
| Conditioners | |
| Gewicht im Speicher | |
| Cylinder | |
| Piston | |
| Some ways to control | |
| Braking | |
| Receiver | |
| Receiver, Accumulator | |
| Open way of flow | |
| Open way of primary flow | |
| Way of flow | |
| Shut-off way of flow | |
| Two ways of flow | |
| Three way of flow | |
| Three way of flow - Shut-off | |
| Four way of flow | |
| Four way of flow - combined internally | |
| All way of flow - Shut-off | |
| Five way of flow | |
Connection line | |
| Connection | |
| Intersection without a connection | |
| Connection point | |
Hydraulic and pneumatic lines: | |
| Operating line | |
| Control cable | |
| Control line | |
| Draw elements which are assembled | |
| Mechanical connections | |
Line types - cables: | |
| Continuous | |
| Border | |
| Center | |
| Dashdot | |
| Dashed | |
| Hidden | |
| Flex | |
| Circulation | |
| Piping, insulated | |
| Piping, heated or cooled and insulated | |
| Insulation | |
| Piping, heated or cooled | |
| Parallel Dot | |
| Parallel | |
| Piping with jacket | |
| Insulation casing pipe | |
| Untreated water | |
| Chemicals | |
| Air | |
| Combustible gases | |
| Non combustible gases | |
| Solid fuels | |
| Combustible waste | |
| Other media | |
| Spiral | |
| Elastic | |
| Elastic dash | |
| Elastic cross | |
| Ribbed pipe | |
| Capillary | |
| Capillary dash | |
| Capillary divide | |
| Liquid metal | |
| Line | |
| Pneumatic | |
| Hydraulic | |
| Elctromagnetic | |
| Mechanical | |
| Software | |
| Electro | |
| Coaxial line | |
| Shielded line | |
| Optical fiber | |
| Digital | |
| Impuls | |
Line types - general: | |
| Platform | |
| Wall | |
| Beton | |
| Fireclay brick | |
| Ground | |
| Weld | |
| Zone | |
| Band | |
Joint signs and welding processes: | |
| Welded, brazed and soldered connections. Welds view | ISO 2553 |
| Welding and similar processes. | ISO 4063 |
Marks: | |
| Surface roughness | ISO 1302 |
| Tolerance | ISO 1101 |
| Quick leader - Curved arrow | |
| Edge | ISO 13715 |
| Projection methods | ISO 5456 |
| Cone | ISO 3040 |
| Measuring point | DIN 6773 |
| Reference arrow | ISO 128 |
| Centre hole | ISO 6411 |
| Zigzag line | |
Joint schemes: | |
| Connection (Hexagon head bolt and nut) | PN-81/N-01613 |
| Screw connection (drill only) | ISO 5845 |
| Elongated hole | ISO 5261 |
| Holes | |
| Rivets | |
| Rivet connection (drill only) | ISO 5845 |