Content and standards that are available in the program.

 

NameStandard

Standarized parts

Bolts

Hexagon head bolt - Product grade A and BISO 4014, EN 24014, DIN EN 24014, PN EN 24014, ANSI B 18.2.1
Hexagon head bolt - Product grade CISO 4016, EN 24016, DIN EN 24016, PN EN 24016
Hexagon head boltISO 4017, EN 24017, DIN EN 24017, PN-85/M-82105, GOST 7796-70
Hexagon head bolt, with fine pitch threadISO 8676, EN 28676, DIN EN 28676, PN-85/M-82105, GOST 7796-70
Hexagon flange head boltISO 4162, EN ISO 4162, DIN 6921, PN 82247
Hexagon socket countersunk head screwISO 10642, EN ISO 10642, DIN 7991, PN-EN ISO 10642
Hexagon head bolt - Product grade B - Reduced shankISO 4015, EN 24015, DIN EN 24015, PN-EN 24015
Hexagon socket head cap screwISO 4762, EN ISO 4762, DIN EN ISO 4762, PN-EN ISO 4762, GOST 11738-84
Square head boltPN-88 M-82121
Square head bolt with collarDIN 478, PN-87/M-82301
Knurled thumb screw with low headDIN 653, PN-88/M-82457, GOST 21332-75
Knurled thumb screw with high headDIN 653, PN-88/M-82456, GOST 21331-75
Countersunk flat niob bolt with cross recess HISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80
Countersunk flat niob bolt with cross recess ZISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80
Slotted raised countersunk head screwISO 2010, EN ISO 2010, DIN-EN ISO 2010, PN-EN ISO 2010, GOST 17474-80
Countersunk raised head screw - with type HISO 7046, EN ISO 7046, DIN-EN ISO 7046, PN-EN ISO 7046, GOST 17475-80
Slotted countersunk flat head screwISO 2009, EN ISO 2009, DIN-EN ISO 2009, PN-EN ISO 2009, GOST 17475-80, ANSI B 18.6.3
Round head niob boltDIN 604, PN-91/M-82408, GOST 7785-81
Round head niob boltDIN 607, PN-91/M-82410, GOST 7783-81
Eye bolt threaded up to the headPN-77/M-82426
Eye boltDIN 444, PN-77/M-82425, GOST 14724-69
Slotted set screw with cone pointISO 7434, EN 27434, DIN-EN 27434, PN-EN 27434, GOST 1476-93
Hexagon socket set screw with Cup PointISO 4029, EN ISO 4029, DIN-EN ISO 4029, PN-EN ISO 4029
Hexagon socket set screw with Cone PointISO 4027, EN ISO 4027, DIN-EN ISO 4027, PN-EN ISO 4027, GOST 8878-93
Hexagon socket set screw with Flat PointISO 4026, EN ISO 4026, DIN-EN ISO 4026, PN-EN ISO 4026
Hexagon socket set screw with Dog PointISO 4028, EN ISO 4028, DIN-EN ISO 4028, PN-EN ISO 4028, GOST 11075-93
Hexagon fit bolt with long threaded portionDIN 609, PN-91/M-82342
Hexagon fit bolt with short threaded portionPN-91/M-82341
Square head set screw with cone pointPN-87/M-82305
Lifting eye boltDIN 580, PN-92/M-82472, GOST 4751-73
Lifting eye bolt (fine thread)DIN 580, PN-92/M-82472
Cup head square neck bolts with large head - style ZISO 8677, DIN 603, PN-87/M82406, GOST 7802-81
Cup head square neck bolts with large head - style PDIN 603, PN-87/M82406, GOST 7802-81
Hexagon socket head shoulder screwISO 7379, ANSI B 18.3.3M
BoltFIBRO 244.16, FIBRO 244.16, FIBRO 244.16

Washers

Plain washer - Normal series - Product grade AISO 7089, EN ISO 7089, DIN 125-1A, PN-78/M-82005, GOST 6958-78, ANSI B 18.22.1
Plain washer - Normal series - Product grade CISO 7091, EN ISO 7091, DIN ISO 7091, PN ISO 7091, GOST 6958-78, ANSI B 18.22.1
Plain washer, chamfered - Normal series - Product grade AISO 7090, EN ISO 7090, DIN 125-1B, PN-78/M-82006, GOST 11371-78
Plain washer - Large series -- Part 1: Product grade AISO 7093-1, EN ISO 7093-1, DIN 9021, PN ISO 7093-1, GOST 9649-78
Plain washer - Large series -- Part 2: Product grade CISO 7093-2, EN ISO 7093-2, DIN ISO 7093-2, PN ISO 7093-2
Plain washer - Extra large series -- Product grade CISO 7094, EN ISO 7094, DIN ISO 7094, PN ISO 7094
Plain washer - Small series - Product grade AISO 7092, EN ISO 7092, DIN 433, PN-78/M-82007, GOST 10450-78
Spring lock washerPN-77/M-82008
Spring lock washer lightDIN 127, PN-77/M-82008, GOST 6402-70
Toothed lock washer with internal teethDIN 6797J, PN-82/M-82023
Toothed lock washer with external teethDIN 6797A, PN-82/M-82024
Square washer for wood constructionDIN 436, PN-59/M-82010
Square taper washer for U-sectionDIN 434, PN-79/M-82018, GOST 10906
Square taper washer for I-sectionDIN 435, PN-79/M-82009
Plain washer for clevis pinISO 8738, EN 28738, DIN 1440, PN-EN 28738
Wave spring washerDIN 137, PN-82/M-82037
Washer for spring connectionsISO 7416, EN ISO 7416, DIN 6916, PN-82/M-82039
Tabwasher with 1 tabDIN 93, PN-82M-82021, GOST 13463-77
Tabwasher with 2 tabsDIN 963, PN-82M-82022, GOST 13464-77
Spherical washer CDIN 6319, PN-78/M-82026, GOST 13438-68
Spherical washer DDIN 6319, PN-78/M-82026
Spring lock washer for screws with cylindrical headDIN 7980, GOST 6402-70
Spring look washer, heavy dutyDIN 128, GOST 6402-70
Serrated lock washerDIN 6798J, GOST 10462-81
Serrated lock washerDIN 6798A, GOST 10463-81
Conical spring washerDIN 6796, GOST 13439-68
Shim ringDIN 988
Washer for steel constructionsDIN 7989

Nuts

Hexagon nut - Product grade A and BISO 4032, EN 24032, DIN-EN 24032, PN-EN 24032, GOST 5915-70
Hexagon nut - Product grade CISO 4034, EN 24034, DIN-EN 24034, PN-EN 24034, GOST 5915-70, ANSI B 18.2.2
Hexagon nut, style 1, with metric fine pitch thread - Product grade A and BISO 8673, EN 28673, DIN-EN 28673, PN-EN 28673, GOST 5927-70
Hexagon thin nut (chamfered) -- Product grade A and BISO 4035, EN 24035, DIN-EN 24035, PN-EN 24035, GOST 5916-70
Hexagon thin nut (chamfered) with metric fine pitch thread-Product grade A and BISO 8675, EN 28675, DIN-EN 28675, PN-EN 28675, GOST 5916-70
Hexagon high nutDIN 6330, PN-86/M-82155, GOST 15523-70, ANSI B 18.2.2
Hexagon high nuts Hexagon high nuts with metric fine pitch threadDIN 6330, PN-86/M-82155, GOST 15523-70
Prevailing torque type hexagon nut (with non-metallic insert)ISO 10512, DIN 985, PN-52/M-82175
Hexagon flange nutEN 1661, DIN-EN 1661, PN-EN 1661, GOST P 50592-93
Hexagon flange nutEN 1663, DIN-EN 1663, PN-EN 1663, GOST 8918-69
Hexagon flange nutEN 1664, DIN-EN 1664, PN-EN 1664
Prevailing torque type hexagon nut with flange (with non-metallic insert)- Product grade A and BISO 1666, EN 1666, DIN-EN 1666, PN-EN 1666
Hexagon flange nut with fine threadEN 1667, DIN-EN 1667, PN-EN 1667
Hexagon nut 1,5d with collarDIN 6331, PN-87/M-61272
Hexagon flange nutISO 4161, EN-ISO 4161, DIN-ISO 4161, PN-ISO 4161
Square nut - type 1DIN 557, PN-88/M-82151
Square nut - type 2DIN 562, PN-88/M-82151
Knurled thin nutDIN 467, PN-91/M-82462
Knurled high nutDIN 466, PN-91/M-82461
Hexagon sloted and castle nut - type ZISO 7035, EN-ISO 7035, DIN 935, PN-86/M-82148, GOST 5918-73
Hexagon sloted and castle nut - type KISO 7035, EN-ISO 7035, DIN 935, PN-86/M-82148, GOST 5918-73
Thin hexagon castle nut, Sloted and Castle nut - type ZISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73
Thin hexagon castle nut, Sloted and Castle nut - type KISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73
Hexagon cap nutDIN 917, PN-88/M-82182, GOST 11860-85
Hexagon domed cap nutDIN 1587, PN-88/M-82181, GOST 11860-85
Wing nutDIN 315, PN-64/M-82439, GOST 3032-76
Lifting eye nutDIN 582, PN-92/M-82472
Prevailing torque type hexagon nutISO 10511, EN ISO 10511, DIN ISO 10511, PN ISO 10511
Prevailing torque type hexagon nut with fine pitch threadISO 10513, EN ISO 10513, DIN ISO 10513, PN ISO 10513
Prevailing torque type hexagon nutISO 7040, EN ISO 7040, DIN-EN ISO 7040, PN-EN ISO 7040
Prevailing torque type hexagon nutISO 7042, EN ISO 7042, DIN-EN ISO 7042, PN-EN ISO 7042

Countersinks

Countersink for hexagon socket head boltDIN 974-1, PN-83/M-82069, GOST 12876-67
Countersink for slotted pan head screwsPN-83/M-82069
Countersink for countersunk head screwsISO 7721, PN-87/M-82068
Countersink for countersunk head screwsPN-87/M-82068
Hole - high qualityDIN EN 20273, GOST 11284-75
Blind holeGOST 12415-80
Elongated hole
Taped hole - trough - metricISO 724, EN ISO 724, DIN-ISO 724, PN ISO 724, GOST 24705-81, ANSI B1.13M
Taped hole - trough - inchISO 725, EN ISO 725, DIN-ISO 725, PN ISO 725, ANSI B1.1
Taped hole - blindDIN 76-1, PN-89/M-82063
Countersink for head bolts hexagon and hex nuts without washerDIN 974-2, GOST 12876-67
Countersink for countersunk head screws - high qualityDIN 74, GOST 12876-67

Screws

Slotted pan head screw - Product grade AISO 1580, EN ISO 1580, DIN EN ISO 1580, PN EN ISO 1580, GOST 17473-80
Slotted cheese head screw - Product grade AISO 1207, EN ISO 1207, DIN EN ISO 1207, PN EN ISO 1207, GOST 1491-80
Cross recessed raised countersunk (flat) head tapping screwISO 7050, EN ISO 7050, DIN ISO 7050, PN EN ISO 7050, GOST 1145-80
Cross recessed raised countersunk (oval) head tapping screwISO 7051, EN ISO 7051, DIN ISO 7051, PN EN ISO 7051, GOST 1146-80
Slotted raised countersunk (oval) head tapping screw (common head style)ISO 1483, EN ISO 1483, DIN ISO 1483, PN EN ISO 1483
Hexagon head tapping screwISO 1479, EN ISO 1479, DIN ISO 1479, PN EN ISO 1479
Hexagon flange head tapping screwISO 10509, EN ISO 10509, DIN ISO 10509, PN ISO 10509
Slotted pan head tapping screwISO 1481, EN ISO 1481, DIN ISO 1481, PN EN ISO 1481
Slotted countersunk (flat) head tapping screw (common head style)ISO 1482, EN ISO 1482, DIN ISO 1482, PN EN ISO 1482

Rivets

Plain rivetISO 1051, DIN 660, PN 82952, GOST 10299-80
Countersunk head rivetISO 1051, DIN 661, PN 82954, GOST 10300-80
Mushroom head rivetPN 82957, GOST 10301-80
Flat round head rivetPN 82958, GOST 10302-80
Tubular rivet flat headDIN 7340, PN 82972, GOST 12639-80
Tubular rivet round headDIN 7340, PN 82973, GOST 12638-80
Blind rivet flat headISO 1051, Nity, DIN EN ISO 15977, PN 8297, GOST 15973-2005
Blind rivet countersunkISO 1051, Nity, DIN EN ISO 15978, PN 8297, GOST 15974-2005

Shafting Collars

External Retaining RingDIN 471, PN 85111
Internal Retaining RingDIN 472, PN 85111
Circlip For ShaftsDIN 6799, PN 85112

Pins

Parallel pinISO 2338, EN ISO 2338, DIN EN ISO 2338, PN EN ISO 2338, GOST 3128-70
Taper pinISO 2339, EN 22339, DIN EN 22339, PN EN 22339
Parallel pins with internal threadISO 8733, EN ISO 8733, DIN EN ISO 8733, PN EN ISO 8733
Taper pin with internal thread, groundISO 8736, EN 28736, DIN EN 28736, PN EN 28736
Grooved pin - Half-length centre groovedISO 8743, EN ISO 8743, DIN EN ISO 8743, PN EN ISO 8743
Grooved pin - Full-length taper groovedISO 8744, EN ISO 8744, DIN EN ISO 8744, PN EN ISO 8744
Grooved pin - Half-length taper groovedISO 8745, EN ISO 8745, DIN EN ISO 8745, PN EN ISO 8745
Grooved pin - Half-length reverse-taper groovedISO 8741, EN ISO 8741, DIN EN ISO 8741, PN EN ISO 8741
Grooved pin - One-third-length centre groovedISO 8742, EN ISO 8742, DIN EN ISO 8742, PN EN ISO 8742
Grooved pin - Full-length parallel grooved, with pilotISO 8739, EN ISO 8739, DIN EN ISO 8739, PN EN ISO 8739
Grooved pin - Full-length parallel grooved, with chamferISO 8740, EN ISO 8740, DIN EN ISO 8740, PN EN ISO 8740
Spring-type straight pin -- Slotted, heavy dutyISO 8752, EN ISO 8752, DIN EN ISO 8752, PN EN ISO 8752
Spring-type straight pin -- Coiled, standard dutyISO 8750, EN ISO 8750, DIN EN ISO 8750, PN EN ISO 8750

Parallel keys

Parallel key with round endDIN 6885, PN-M-85005, GOST 23360
Parallel key with half-length centre holeDIN 6885, PN-M-85005
Parallel key with round end (one end)PN-M-85005, GOST 23360
Parallel key with round end (friction-fit)PN-M-85005
Parallel key with round end, double holes (friction-fit)DIN 6885, PN-M-85005
Parallel key with round end (both ends) (high)PN-M-85001
Parallel key with round ends (both ends) (low)ISO 2491, PN-M-85002
Keyway on shaftISO 2491, DIN 6885, PN-M-85005

Clevis pins

Clevis pin with head and (with or without split pin hole)EN 22341, DIN EN 22341, PN-EN 22341
Clevis pin without head (with or without split pin hole)EN 22340, DIN EN 22340, PN-EN 22340

Split pin

Split pinEN ISO 1234, DIN EN ISO 1234, PN-EN ISO 1234

Screw connections

Connection (Hexagon head bolt and nut)
Connection (Countersink + Hexagon socket head cap screw and nut)
Connection (Hexagon socket head cap screw + nut)

Keys

Round ends Taper Key (both ends)
Taper key with chamfer
Round end Taper Key (one end)
Taper key with gib head
Round ends flat key (both ends)
Flat key with chamfer
Round end plain key (one end)
Plain key with gib head

Rolling bearings

Single row deep groove ball bearing
Ball bearing with one shield
Ball bearing with two shields
Ball bearing with one rubber seal
Ball bearing with two rubber seals
Ball bearing with tapered bore
Thrust ball bearing with snap ring groove on outer ring
Thrust ball bearing with snap ring groove on outer ring and washer
Angular contact ball bearing - Single-direction - 72 i 73 catalogue
Angular contact ball bearing - Single-direction - A70, A72 and A73 catalogue
Angular contact ball bearing - Single-direction - catalogue
Angular contact ball bearing - Dual directions - catalogue
Angular contact ball bearing - Dual directions - QJ19, QJ10, QJ2 and QJ3 catalogue
Angular contact ball bearing - Dual directions
Self-aligning ball bearing
Self-aligning ball bearing with tapered bore
Single row cylindrical roller bearing
Single row cylindrical roller bearing NJ design
Single row cylindrical roller bearing N design
Single row cylindrical roller bearings NUP design
Cylindrical roller bearings without inner ring RN design
Single row thrust cylindrical bearing
Double row thrust cylindrical bearing
Double row full complement cylindrical roller bearing NNU49 design
Double row full complement cylindrical roller bearing NNU49K design
Double row full complement cylindrical roller bearing NN30 design
Double row full complement cylindrical roller bearing NN30K design
Multi-row cylindrical roller bearing, caged
Multi-row cylindrical roller bearing, without cage
Double row tapered roller bearing
Double row tapered roller bearing with tapered bore
Double row tapered roller bearing with tapered bore with pull inner ring
Needle roller thrust bearing with trough inner ring, caged
Needle roller thrust bearing with blind inner ring, caged
Needle roller thrust bearing with trough inner ring, without cage
Needle roller thrust bearing with blind inner ring, without cage
Tapered roller bearing - metric

Screw plugs

Hex head screw plug type A
Hex head screw plug type B

Lubricators

Lubricating nipple, cone type - tapered thread
Lubricating nipple, cone type - cylindrical thread
Angle Lubricating nipple, cone type - tapered thread
Angle Lubricating nipple, cone type - cylindrical thread

Steel products

Steel shapes

L-shape equal angles ANSIASTM A36, ASTM A36, ASTM A36
Flat steel bar (Hot rolled)EN 10058:2004U, DIN-EN 10058:2004U, PN-EN 10058:2004U
L-shape equal anglesEN 10056-1:2000, DIN-EN 10056-1:2000, PN-EN 10056-1:2000
U-shape (economic)DIN 1026-2:2002-10, PN-71/H-93451
U-shape (hot rolled)DIN 1026-1:2000-3, PN-H-93400:2003
U-shape (yield strength over 490 MPa)PN-73/H-93460.04
T-shape (hot rolled)EN 10055:1999, DIN-EN 10055:1999, PN-EN 10055:1999
Z-shapeDIN 1027:2004-04, PN-73/H-93460.08
I-shape (Hot rolled)DIN 1025-1
Hot rolled I-beams - Part 5 IPE-serieDIN 1025-5, PN-H-93419
Hot rolled I-beams - Part 2 IPB-serieDIN 1025-2
Hot rolled I-beams - Part 3 IPBI-serieDIN 1025-3
Hot rolled I-beams - Part 4 IPBv-serieDIN 1025-4
H-shape (Hot rolled wide-flange steel beams - Dimensions)DIN 1025, PN-H-93452
L-shapeEN 573, DIN-EN 573, PN-EN 573
I-shapeDIN 1025-5
Welded square structural tubing (Cold formed welded structural hollow sections)EN 10219-1:1997, PN-EN 10219-1:1997
Welded round structural tubing (Cold formed welded structural hollow sections)EN 10219-2:2000, DIN-EN 10219-2:2000, PN-EN 10219-2:2000
Welded round structural tubing (For precision applications)EN 10305-3:2005, DIN-EN 10305-3:2005, PN-EN 10305-3:2005
Welded square structural tubingEN 10210-1:2006, DIN-EN 10210-1:2006, PN-EN 10210-1:2006
Welded round structural tubingEN 10210-2:2006, DIN-EN 10210-2:2006, PN-EN 10210-2:2006
Welded rectangular structural tubingEN 10210-5:2006, DIN-EN 10210-5:2006, PN-EN 10210-5:2006

Steel bars

Round stainless steel bar (Hot rolled)EN 10060:2004U, DIN-EN 10060:2004U, PN-EN 10060:2004U
Square steel bar (Hot rolled)EN 10059:2004U, DIN-EN 10059:2004U, PN-EN 10059:2004U
Hexagon steel bar (Hot rolled)EN 10061:2004U, DIN-EN 10061:2004U, PN-EN 10061:2004U

Rods

Round steel rodEN 10017:2006, DIN-EN 10017:2006, PN-EN 10017:2006

Steel pipes

Seamless steel tube for pressure purposesEN 10216:2004, DIN-EN 10216:2004, PN-EN 10216:2004
Non-alloy steel tube for liquid purposes (including water)EN 10224:2006, DIN-EN 10224:2006, PN-EN 10224:2006
Carbon steel tube suitable for screwingPN-H-74200:1998
General-purpose seamless steel tubePN-H-74220:1984

Construction of apparatus

Flanges

Welding neck flanges ANSI 150lb/sq.in. Up to 12''ANSI 150lb/sq.in.
Welding neck flanges ANSI 300lb/sq.in. Up to 12''ANSI 300lb/sq.in.
Welding neck flanges DIN 2632DIN 2632
Welding neck flanges DIN 2633DIN 2633
Welding neck flanges DIN 2634DIN 2634
Welding neck flanges DIN 2635DIN 2635
Welding neck flanges DIN 2636DIN 2636
Blind flange DIN 2527 Form BDIN 2527
Flat flange for welding DIN 2573 Form ADIN 2573
Flat flange for welding DIN 2576 Form ADIN 2576
Lapped flanges Plain collars DIN 2641DIN 2641
Lapped flanges Plain collars DIN 2642DIN 2642
Welding Flanges for Pressure Vessels DIN 28031 Forms ADIN 28031
Welding Flanges for Pressure Vessels DIN 28032 Forms DDIN 28032
Welding Flanges for Pressure Vessels DIN 28036DIN 28036
Welding neck flanges DIN-EN 1092-1EN 1092-1
Oval flangesDIN 2561

Dished ends

Torospherical dished ends DIN 28011DIN 28011
Torospherical dished ends DIN 28013DIN 28013

Fittings

Elbow DIN 2605-1 45°DIN 2605-1
Tee DIN 2615 style ADIN 2615
Eccentric reducer with reduced pressure factor DIN 2616-1DIN 2616-1

Pipes

Stainless steel pipe DIN 10297-1DIN 10297-1
Non-alloy steel pipeEN 10224:2006
Seamless steel pipe for pressure purposesEN 10216:2004
Stainless steel pipe, with threadPN-H-74200:1998

Heat exchangers

Heat exchanger DIN 28184-1 - 2 beamsDIN 28184-1
Heat exchanger DIN 28184-2 - 2 beamsDIN 28184-2

Hydraulics and pneumatics

Drives and control

ISO 1219-1

Hydraulic Source of Energy Direction
Path of fluid through valve
Rotary motion
Variability pump, motor etc.
Electric
Closed path or port
Opposing Linear Actuators Limited Angle of Motion
Temperature Indication or control
Prime mover
Spring
Restrictor
Place for including Non-Return valve symbol
Flexible
Piston rod
Shaft
Shaft -two ways rotate
Detent positioning limited angle of motion
Locking device or control
Over centre device to prevent stopping on dead centre
Non-specific control
Push button control
Pull button control
Push-Pull button control
Lever control
Pedal control
Treadle control
Plunger control
Plunger control with adjustable lenght
Two way function spring
Two way roller control
Roller control
Solenoid controller 1-winding
Solenoid controller 2-winding
Solenoid controller 2-winding assembly
Electric motor
Piezoelectric component
Pressure controller
Operate valve by differential pressure area
Internal pilot path
External pilot path
Hydraulic pilot (Direct) (steering by application of pressure)
Hydraulic pilot (Direct) (steering by release hydraulic pressure)
Oil Pressure Controller (via Control) (steering by application of pressure)
Oil Pressure Controller (via control) (steering by release hydraulic pressure)
Oil Pressure-indirectly Controller (via Control) (steering by application of pressure)
Oil Pressure-indirectly Controller (via Control) (steering by release hydraulic pressure)
2-Stage hydraulic pilot
Solenoid Operated pilot Valve-Exhaust pilot stage
Solenoid Operated pilot Valve
Pneumatic and Pilot Stage - Pilot Drain
Solenoid Control Hydraulic Pilot Spring Cantered External Pilot Supply Drain
External feedback
Internal feedback
Hydraulic motor
Fixed capacity with one direction of flow - pump
Fixed Capacity Bi-Directional Output motor - pump
Variable Capacity (with Undefined Control Mechanism One Direction of Flow) - pump/motor
Fixed Capacity Unit-Directional Output
Variable Capacity (with Hand Control Mechanism Two Directions of Flow) - pump/motor
Hydraulic variable speed drive unit
Pressure-compensated variable pump
Variable pump motor
Single-acting retraction cylinder
Double-acting hydraulic cylinder
Double-acting telescopic hydraulic cylinder
Pneumatic- hydraulic actuator
Pneumatic- hydraulic, continuous operations
Pressure intensifier
Pressure intensifier, continuous operations
Accumulator
Accumulator-Fluid Maintained Under Pressure by Inert Gas
Electric motor
Prime mover, Non-electric
Transient position
Position opposite, extreme positions
Extreme position opposite, middle (neutral)
Directional control valve — with manual control
Directional control valve 2/2, — with lever control
Directional control valve 2/2, — with lever control, with return spring
Directional control valve 3/2, - with roller control, with return spring
Directional control valve 4/2, - with button control, with return spring
Directional control valve 3/3, - with solenoid control, spring centred
Directional control valve 4/3, - with button control, spring centred
Directional control valve 5/3, - 2 stage solenoid and increase pressure, spring centred
Directional control valve 2/2, - with support valve pre-control
Directional control valve 3/2, - with solenoid control, with return spring
Directional control valve 5/2, - with pressure control
Directional control valve 4/3, pre-control
Directional continuous control valve (open), middle (neutral) position
Directional continuous control valve (close), middle (neutral) position
Servo-valve
Shuttle-off valve — free
Shuttle-off valve — spring loaded
Shuttle-off valve — pilot controlled
Shuttle-off valve — pilot controlled, spring loaded
Shuttle valve
Priority shuttle valve
Rapid exhaust valve
Pressure relief valve, single-stage (Simplified symbol)
Pressure relief valve, two-stage
Pressure sequence valve
Pressure relief valve, electrically operated
Reducing valve - pressure regulator, single-stage
Reducing valve - pressure regulator, two-stage
Reducing exhaust valve
Throttle valve
Gate valve
Adjustable restrictor valve, — with mechanical control against a return spring
One way restrictor valve
Series flow control valve
Compensated flow control valve (Simplified symbol)
Flow control valve — with fixed output and relief port to reservoir
Vented reservoir open to atmosphere
Vented reservoir with inlet pipe above fluid level
Pressurized reservoir
Filter or strainer
Air Filter
Pressure indicator
Pressure gauge
Differential pressure gauge
Liquid level gauge
Thermometr
Flow indicator
Flow meter
Integrating flow meter
Tachometer
Torque meter
Pressure switch
Limit switch
Analog transducer
Pneumatic Source of Energy -direction
Variability pump, motor etc.
Air bleed
Air bleeds (momentary)
Air bleed - adjustable (momentary)
Air exhausts port — plain with no provision for connection
Air exhaust port — threaded for connection
Self-sealing coupling (— connected, without mechanically opened non-return valve)
Self-sealing coupling (— unconnected, with mechanically opened non-return valves)
Angular/Rotary connection — one way
Electric motor
Piezoelectric component
External pilot path
Pneumatic pilot (Direct) (steering by application of pressure)
Pneumatic pilot (Direct) (steering by release pneumatic pressure)
Pneumatic pilot (Directional valve) (steering by application of pressure)
Pneumatic pilot (Directional valve) (steering by release pneumatic pressure)
Pneumatic Pressure-indirectly controller (via Control) (steering by application of pressure)
Pneumatic Pressure-indirectly controller (via Control) (steering by release hydraulic pressure)
Combined control — by solenoid and pilot Valve-Exhaust pilot stage
Pneumatic motor
Pneumatic motor - variable capacity
Pneumatic motor - fixed capacity, — with two directions of flow
Pneumatic motor - variable capacity, — with two directions of flow
Air compressor
Pneumatic semi-rotary actuator (Oscillating motor)
Single-acting pneumatic extension cylinder
Single-acting pneumatic retraction cylinder
Double-acting pneumatic cylinder
Double acting-Fixed cushion at full area side only - cylinder
Double acting-Adjustable Cushioning at both ends - cylinder
Single acting Telescopic - cylinder
Rodless cylinder
Pneumatic impact cylinder
Tandem cylinder
Four Acting-Double Piston Rod -built in position controller
Double Acting-Double Piston Rod -built in position controller
Rodless cylinder adjustable cushioning, magnetic
Cable cylinder
Double acting piston Rod with pneumatic brake
Air spring actuator
Reserve air receiver
Air receiver
Transient position
Directional control valve 3/2, - with roller control, with return spring
Directional control valve 4/2, - with button control, with return spring
Directional control valve 3/3, - with solenoid control, spring centred
Directional control valve 4/3, - with button control, spring centred
Directional control valve 5/3, - 2 stage solenoid, increase pressure, spring centred
Directional control valve 3/2, - controlled by solenoid with return spring
Directional control valve 5/2 — controlled by pressure in both directions
Shuttle-off valve — free
Shuttle-off valve — free (Simplified symbol)
Shuttle-off valve — spring loaded
Shuttle-off valve — pilot controlled (Simplified symbol)
Shuttle-off valve — pilot controlled, spring loaded
Priority shuttle valve
Rapid exhaust valve
Shut-off valve
Flow divider valve
Filter with additional magnetic element
Filter with contamination indicator
Filter with manual drain
Filter with separator, automatic drain
Filter with separator, manual drain
Air dryer
Lubricator
Conditioning unit
Conditioning unit (Simplified symbol)
Cooler — without representation of the flow lines of the coolant
Cooler — indicating the flow lines of the coolant
Heater (arrows in the diamond indicate the introduction of heat)
Temperature controller
Pulse counter with electric output signal
Pulse counter with pneumatic output signal
Silencer
Symbols control methods - one way acting
Controlling valves with three or more positions
Symbols of control mechanisms with three positions
Controlling by pressure in middle (neutral) position
Elements indirectly controlled
Combined control - by 2 independent control (push-poll button solenoid)
Combined control - by 2 dependent control (solenoid pilot directional valve)
Safety mechanism, protection against overloading technological flow
Safety mechanism, protection against overloading return technological flow
Safety mechanism, protection against overloading every technological flow
Safety mechanism, protection against overloading 2 directions technological flows
Safety mechanism, protection against overloading return stagnancy technological flows
Safety mechanism, protection against overloading return stagnancy-return technological flows
Safety mechanism, protection against overloading technological and stagnancy
Stop in technological flow possible return flow
Stop in return flow possible technological flow
Stop in all flows
Adjustable in technological flow
Adjustable in return flow
Adjustable in all flow
Upholding after technological flow
Upholding after return flow
Upholding after any flow
Setting less accurate technological flow
Setting less accurate return flow
Setting less accurate all flows
Setting accurate and stabilizes technological flow
Setting accurate and stabilizes return flow
Setting accurate and stabilizes all flows
Protection in technological flow
Protection in return flow
Protection in all flow
Blockade after technological flow
Blockade after return flow
Blockade after any flow
Mechanical control of servomotor
Electrical control of servomotor
Dividers proportionate
Flow Dividers - one stage
Flow Dividers - two stages
Individual station for one performance at the same pressure safety
Individual station for one performance at two pressure safety
Individual station with two capacities at the same pressure safety
Individual station with two capacities at two safety pressures
Engine, fixed capacity, — with one direction of flow
Element, fixed capacity, — with two directions of flow
Pomp, variable capacity, — with one direction of flow
Engine, variable capacity, — with one direction of flow
Element, variable capacity, — with one direction of flow
Element, variable capacity, — with two directions of flow
Engine with two directions of flow, - with smooth change of capacity
Elements of processing power
Gauge
Shuttle-off valve, connection, and roll
Engine or a pump with a limited rotate angle
Control element
Conditioners
Cylinder
Piston
Some ways to control
Braking
Receiver
Receiver, Accumulator
Open way of flow
Open way of primary flow
Way of flow
Shut-off way of flow
Two ways of flow
Three way of flow
Three way of flow - Shut-off
Four way of flow
Four way of flow - combined internally
All way of flow - Shut-off
Five way of flow

Logical fluid circuits, binary logic symbols

ISO 5784-1

Logical Element
Symbol qualifier functions AND/OR figures
Connecting symbols
Direction of the flow of information
Deployment of INPUT and OUTPUT
NOT
Entry negation
Entry blocking
Entry blocking - negation
Entry static
Entry dynamic, for which the dynamic state of 1 means the transition from 0 to 1
Entry dynamic, for which the dynamic state of 1 means the transition from 1 to 0
''YES''
''NOT''
''AND''
''OR''

Marks

Joint signs and welding processes

Welded, brazed and soldered connections.
Welds view
ISO 2553
Welding and similar processes.ISO 4063

Marks

Surface roughnessISO 1302
ToleranceISO 1101
Quick leader - Curved arrow
EdgeISO 13715
Projection methodsISO 5456
ConeISO 3040
Measuring pointDIN 6773
Reference arrowISO 128
Centre holeISO 6411
Zigzag line

Schemes and joint symbols

Joint schemes

Connection (Hexagon head bolt and nut)PN-81/N-01613
Screw connection (drill only)ISO 5845
Elongated holeISO 5261
Holes
Rivets
Rivet connection (drill only)ISO 5845

Cables and lines

Hydraulic and pneumatic lines

Operating line
Control line
Draw elements which are assembled

Line types - cables

Flex
Circulation
Piping, insulated
Piping, heated or cooled and insulated
Insulation
Piping, heated or cooled
Parallel Dot
Parallel
Piping with jacket
Insulation casing pipe
Untreated water
Chemicals
Air
Combustible gases
Non combustible gases
Solid fuels
Combustible waste
Other media
Spiral
Elastic
Elastic dash
Elastic cross
Ribbed pipe
Capillary
Capillary dash
Liquid metal
Pipe 01
Pipe 02
Pipe 03
Pipe 04
Pipe 05
Pipe 06
Pipe 07
Pipe 08
Pipe 09
Pipe 10
Pipe 11
Pipe 12
Pipe 13
Pipe 14
Pipe 15
Pipe 16
Pipe 17
Pipe 18
Pneumatic
Pneumatic 1
Hydraulic 2
Hydraulic 1
Elctromagnetic
Mechanical
Software
Electro
Electro 1
Electro 2
Electro 3
Coaxial line
Shielded line
Optical fiber
Digital
Impuls 1
Impuls 2

Line types - general

Platform
Wall
Beton
Fireclay brick
Ground
Ground 2
Ground 3
Weld 1
Weld 2
Weld 3
Weld 4
Weld 5
Weld 6
Zone 1
Zone 2
Band 1
Band 2